Your cart is empty.
Your cart is empty.Product Description
Package Includes:
1 x 32mm Pin Wrench MT0006
4 x 4mm Removable Pins
4 x 4.5mm Removable Pins
26 x Tilt/Trim Cap Seals 115225FS
Specially designed with 4 pins to engage caps and prevent breakage.
Used with 1/2 inch socket drive to rebuild a leaked device on outboard engine, hydraulic trim and tilt unit without damaging the caps and steering cylinder.
Premium Material:
Made of top quality STEEL
Great strength, prevent from corrosion and rust,
Impact resistance, sturdy and durable.
High precision and hardness ensure long-term service.
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm
Essential handy tool.
Min Pin Strength: 200 ft-lb
Replacement Pins: MT0005 - S-4mm.
Equivalent for Yamaha Factory Tool: YB-06175-1A and YB-06548.
Great Compatibility:
Trim Caps for All Showa manufactured Trim/Tilt Units
Trim Caps for Yamaha F115-F150
Trim caps for All Yamaha I4 2.8L (F175-F200)
Trim Caps for Yamaha 2-Strokes (115-225hp)
Trim Caps for All Yamaha VMAX
Trim Caps for All Suzuki Honda Johnson Evinrude
Compatible Models:
60X-43800-00-4D, 63P-43800-00-4D, 63P-43800-01-4D, 63P-43800-02-4D,
63P-43800-02-8D, 63P-43800-03-00, 63P-43800-03-00, 63P-43800-06-00,
63P-43800-07-00, 64E-43800-05-00, 64E-4384J-00-00, 67H-43800-00-4D,
68F-43800-00-4D, 68F-43800-01-4D, 68V-43800-03-4D, 68V-43800-04-00 & More.
Fits for 1997 to current Yamaha boat power trim tilt units 115HP, 150HP, 175HP, 200HP, 225HP (20" Shaft), 250HP (20" Shaft) & More.
Also fits for Suzuki Honda Tohatsu Nissan all Showa Style 3 ram integrated trim tilt system.
Warm Tips: Doesn’t fit for Yamaha 200-300hp 4 strokes.
Usage:
In freshwater application on a bass boat you will see the bolts have stretched and lost their torque from the hydraulic pressure in between the valve body and manifold.
In salt water application, salt and corrosion build between the flange and wedges it apart as well as oxidizing the O-ring grooves and forcing them to fail and fall out of place.
Chris
Reviewed in the United States on June 4, 2024
The tool appeared to be made well however I only received one set of pins for the tool. The larger size pins were missing. Unfortunately the missing size pins were the ones I needed for my job.
mrmesh
Reviewed in Australia on March 11, 2024
I could not use the wrench on the tilt it is only suitable for the trim i will need to buy the correct wrench
mathew lasky
Reviewed in the United States on March 11, 2024
This seal repair kit was exact match for my 2014 Yamaha 250 Sho 4 Stroke, tilt trim system. Tool worked great on rams but does not fit main lift cylinder. Will need that tool to complete this. But seals were exact matches and super easy to install. Resolved my leaking rams issue.
Sheri
Reviewed in Canada on April 30, 2023
I rebuild all types of Tilt/Trims, and the only way to bust open corroded old Tilt/Trims is to use an air hammer. I don't even attempt to use the tool to loosen the caps, only to put them back on (50 psi). The manufacture seals are better quality/material, but cost 10 times more. Be prepared to just order new caps in the event you damage the old ones when trying to extract them. Sometimes it's unavoidable.Double check your cap measurements, since your Tilt Cap may be a different size then your Trim caps if ordering new ones. Check out the rams, for any defects and use some 600 grit to remove any rough spots. Good luck.
Jason Gardner
Reviewed in the United States on April 26, 2023
Wrench is solid , pins are made with inferior junk Chinese metal with no strength, broke all 4 pins trying to remove the seals,not only did I loose the pins but it ruined the holes on the seal I was trying to remove
James E. Eulberg
Reviewed in the United States on August 27, 2022
Great, worked exactly as expected
Customer
Reviewed in Canada on October 1, 2022
The tool works great,but the seals are terrible
Recommended Products
$11.65
$ 5 .75 $5.75