Your cart is empty.
Your cart is empty.Product Description
8K@60Hz DisplayPort KVM Switch 3 Monitors 2 Computers Sharing 3 Monitor and 3 USB 3.0 Ports, Audio & Microphone
Features:
1. 8K Triple Monitor KVM Switch allows 2 computers/laptops to share one set of keyboard, mouse, and 3 monitors (3 DisplayPort)
2. Support DP 1.4 standards and downward compatibility. 3 monitors output support up to 8K@60Hz for extended,mirrored or spliced display（Depends on your computer's graphics card.）;
3. 2 Switching modes: Button switch and wired remote.
4. KVM switch equipped with 3 USB 3.0 ports for USB devices, and with extra Audio Microphone output
5. Equipped with a 5V power supply, ensuring stable operation even when high-power devices are connected.
6. Plug and play, compatible with Windows, Linux, Mac, Unix, Ubuntu, Raspberry and most other major OS
7. The ports that need to plug in DisplayPort/USB cables are all hidden behind the triple monitor KVM switch, so the desktop doesn't get cluttered, you can enjoy the clean workspace.
Ultra HD 8K@60Hz Triple Monitor KVM Switch
- Confirms to DP 1.4 protocol, supports a maximum resolution of 8K@60Hz 4K@144Hz, and is compatible downwards.
- Only when both your computer Graphics card, monitor and cable support 8K@60Hz then you can get 8K@60Hz effect, so if you want the max resolution you have to check your devices first.
3 Display Modes
Extended Display
Mirrored Display
Spliced Display
1)Extended mode can output three different screens and mirror mode can output three identical screens. Note：If your graphics card has a splicing screen function, you can use the splicing screen mode.
2) The requirement for this KVM to achieve a triple-screen display is that each PC you connect to has the capability to support a triple-screen display. This has nothing to do with KVM.
installation steps:
1. Insert the DC/5V adapter into the KVM ;
2. Plug the 3*DisplayPort cable into the KVM switch and monitor;(Output)
3. Plug the DisplayPort cable and USB cable into the KVM switch and your computer/laptop (DP cables are not included)(Input)
DP IN 1A +DP IN 1B + DP IN 1C + USB IN 1=PC1
DP IN 2A + DP IN 2B + DP IN 2C + USB IN 2=PC2
Please check whether DP IN 1A, DP IN 1B, DP IN 1C, and USB IN 1 corresponding, and whether DP IN 2A, DP IN 2B, DP IN 2C and USB IN 2 are corresponding. Mixed insertion is not supported.
4. Insert the mouse and keyboard into the KVM switch
5. If needed, you can connect a microphone and audio port
Note：
1. Most of the reasons why only one video output works is because of incorrect connection. Please make sure each PC has(3 DP+USB cable) connect to the KVM.
2. If the input USB3.0 ports are not connected or connected incorrectly, the output USB device will not be recognized.
3. Note: DP cables are not included
Wired Remote Control
- Supports wired remote switching for easy cable management, you can switch directly on the desktop, convenient for your life and work.
Switch by Panel button
- Push-button design allows for one-touch switching using a button on the KVM Switch box, eliminating the need to plug and unplug cables frequently, saving space and time.
LED Indicator
- When switching to which PC, the LED will tell you whether PC1 or PC2 is active.
Audio and microphone output
- 3 monitors 2 computers KVM comes with a 3.5mm Audio Jack port with a DAC chip inside, which can be inserted into a 3-segment 3.5mm earpiece device, and a 3.5mm microphone interface, which can be inserted into a 3-segment microphone.
Nico
Reviewed in Germany on March 25, 2025
Das Gerät macht was es soll, da ich aber flüssig mit meinen Computern arbeiten möchte fehlte mir eine Emulation, so das die Geräte bei jedem umschalten neu gefunden und eingerichtet wurden was den Arbeitsfluss behindert.
てん
Reviewed in Japan on January 7, 2025
まだ、検証中なので、"動作しない" と断言はしませんが、ケーブルをつないだら動くという簡単な製品ではなさそうです。ワイヤリングはしましたが、i) 私の PC 3台は、いずれも KVM を経由したディスプレイ映像を受信できていません。ii) KVM を経由したキーボード入力は、1台で 1度可能でしたが、再現性が取れていません。他の 2台では 1度も入力確認できていません。iii) KVM を経由したマウス入力は 1度も確認できていません。機器構成が複雑なので、検証するだけでも大事です....(T_T)
Christy S.
Reviewed in the United States on September 7, 2024
I bought their lower model kvm switch first thinking it would support 1440p at 144hz. it would do just fine at 100hz. but as soon as you would up it to 144hz the screens would start to flicker. so i bought better cables that were 2.1 DP. This did not fix the issue. Then i bought this version since it was advertised to handle 4k at 144hz. No, you cannot handle 1440p at 144hz I wouldn't even try 4k. I am returning both KVMs and will be seeking alternate products.
MILK.
Reviewed in Canada on September 16, 2024
I do not use 3 monitors for this, only two.Our living room has a big projector and a monitor on the side. We also have two computers: a laptop for streaming, and a home server mini PC.We had dedicated peripherals for each PC and used the monitor for the mini PC and the laptop screen for the laptop. While this works perfectly fine, it would be nice to be able to have a single set of peripherals and just swap between devices on the fly... sound familiar?Anyways, this boy is quite bulky so we used nano-tape to stick it under a table and keep it out of sight.The controller is on the top of the table and the laptop is neatly closed and out of sight (only opened whenever the PC shuts down, but then immediately closed afterward.)Switching has a few second delay, approx. 4 seconds.No issues with power on the USB ports or a monitor not getting signal.In other words, a good KVM.
conz27
Reviewed in Canada on August 26, 2024
Prior to trying this 4 port KVM, I had purchased one that cost 3x more in hopes that it would be mean better quality. This KVM outperforms that other - supposedly superior KVM - by a mile.It was a simple, straightforward install with 2 Windows Laptops (ThinkPad + Dell XPS) + 1 MacBook Pro M1 Max. I can switch between all 3 seamlessly with about a ~2-3 second delay. I use docking stations, and this KVM had no issues working with them. My keyboard, mouse, webcam, and Bluetooth audio (via USB dongle) can work with all 3 laptops at the click of a button. Also HUGE plus, no "Too many USB hubs are connected together. A USB hub will not function when it's connected more than 5 hubs away from the root port" errors ... between the docking station, keyboard built-in USB hub, and etc... This had previously caused me issues with the more expensive KVM.I saw some people complaining that you had to purchase DisplayPort cables separately ... honestly, not that big a deal when the KVM does what it's supposed to. I've only used it for a 4 days prior to writing this review, so hopefully it will continue to work well in the months and years to come.
Sandy
Reviewed in the United States on July 19, 2024
This KVM is excellent with a couple of small niggling issues. I run 3 4k resolution monitors and use this KVM to switch between a work PC and my home PC. This KVM is a replacement for my ConnectPro UDP2-12AP which has problems with screens blanking out intermittently.- I have high-quality cables, and the connectors are fat enough that plugging them in was a problem. They are force slightly apart which puts pressure on the connectors. an extra 1mm of gap between the DPDK sockets would have been enough to make top quality cables work well.- Under some conditions, switching between PCs causes the windows to all move to one screen, and occasionally for all windows to be reduced in size and placed in the top left corner. Since I generally have a lot of windows open, this can be annoying.
zion
Reviewed in Japan on June 6, 2024
モニターは3枚4K構成で、まともに動きません。触れないくらい熱くなります。いろいろと壊れるんじゃないかと思い、即外しました。
CAREL
Reviewed in Canada on May 6, 2024
It was basically plug and play and I was actually surprised just how well it worked. My setup is not that straight forward so I was not 100% confident that it would actually work. I have 2013 27 inch iMac as my home computer and a Lenovo Thinkpad for work. And also have an Apple LED monitor that I wanted to share between the two computers. The Apple monitor has mini display port and USB cable that I plugged into the KVM. Had to use a mini DP to DP adaptor for the Apple Monitor. Then for the Mac I used the supplied USB cable plus a mini DisplayPort to DisplayPort cable into the KVM. For the Thinkpad I used the supplied USB cable plus a regular DisplayPort cable. And it all just works. Only installed it today and so will come back later for a long term review.
Matt Courtemanche
Reviewed in Canada on December 28, 2024
Two major gripes:1. bank C of DP didn't work. So its a 4x2 DP for me.2. the DP ports are very close together, and full size latched DP cables (eg. Club3D) will be too big to plug in next to each other.I wish the USB inputs were on the back as well for cable management.I was going to return this, but got another super cheap 2x2 DP KVM for my secondary 2 monitors which don't need to switch between all machines. All in I'm at like $150 of KVM and my setup is now working. Still cheaper than a Level1 4x4 KVM.
Eric Z.
Reviewed in Canada on October 2, 2024
I bought it in April 2024, today, after 5months, it started flickering and only one DP port can work suddenly.it's sad have to replace it with something else...!
Honest Reviews
Reviewed in Canada on April 29, 2024
I am in no way a techy person however I do have a job where I work in two separate departments meaning I need to work from separate laptops on separate monitors. With this, I am able to switch between with ease and have the ability to utilize all of my working time.Again, I am no way techy nor do I have vast knowledge when it comes to the more complicated processes of this product however as a consumer, I can say that this product is very well made and thought out. It is not too big and bulky, it isn't and eye and getting everything set up was quick and easy. It is very user friendly.
Recommended Products