Your cart is empty.
Your cart is empty. Features:
32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware and stable firmware provide more reliable performance.
6 flight modes and 6-position switching, including GYRO-OFF, NORMAL, LOCK, ANGLE, LEVEL and HOVER modes.
User defined mode supported.
PWM, PPM and multi-protocal serial digital receiver supported.
Customizable output channels and 2 pass-through auxiliary channels.
Dual aileron and dual elevator system, flying-wing (delta-wing) and V-tail supported.
Remote master gain supported.
Firmware upgradable and Programming Card supported.
Serial Receiver Protocols Supported:
PPM Receiver
Futaba SBus (compatible with FrSky SBus, JETI SBus, RadioLink SBus, TBS SBus and WFLY WBus)
Spektrum DSM2/X 1024 Satellite (Remote) Receiver
Spektrum DSM2/X 2048 Satellite (Remote) Receiver
Spektrum SRXL
Multiplex SRXL / JR XBUS Mode B
Graupner SUMD
FlySky iBus
JETI EXBus
TBS/ELRS CRSF
Specification:
Main controller: 32-bit microprocessor
Built-in sensors: High-precision MEMS 6-axis sensor
Gyro range: ± 2000 dps
Acceleration range: ± 4g
PWM output: 800 ~ 2220uS, median 1500/1520uS, frequency 50Hz ~ 333Hz
Working voltage:DC 4.8V ~ 8.4V
Working temperature: -10℃ ~ 50℃
Dimensions: 43×27×14mm (L×W×H)
Weight: 10g (without connecting cable)
Package Included:
1 x A3 Super 4 Main Controller
1× Program Card
1×LED module
3 x Receiver Cable
1 x Data Cable
1 x Adapter
2 x Double-sided Tapes
Timber
Reviewed in Canada on June 8, 2024
A3 Super4 was not around when I started with model airplanes! Then it would have saved me hundred of $$$! If your model is in an unusual/incontrollable attitude & you're confused, stop, take your hands (fingers) off the controls & A3 Super4 saves the day!No beginner or even an expert should fly a model airplane without the A# Super4 onboard. It's a small investment for your model's safety.
klaus Blauenkjaer
Reviewed in the United States on March 5, 2024
it`s easy to program with the programing card. I`m looking forward put this gyro to the test.
Garet Urban
Reviewed in the United States on February 21, 2024
This costs a bit more than others but was worth it because of software set up / and programming card option- made it easy. Better than the light blinking menu types.If you have mixes or channels reversed you should back model parameters up and then clear to default. When you select V tail like I did it automatically knows how to mix the control surfaces which is pretty dopeI set up 3 modes on a 3 way switch and gain on a knob - had successful maiden flight of a prototype V tail thanks to this guy and will buy more in futureIf your on the fence go for it- don't really need the card option if you have laptop - laptop better than the programming card
Customer
Reviewed in Canada on November 20, 2023
Awesome stabilizer with 5 pwm but wish you would create one with 7 pwm out. 6 and 7 would not need to be stabilized, just for flaps and gear so we don't need another device added for those planes with gear and flaps
Recommended Products
