Makes bleeding brakes on my own super simple. It's great for someone who works in their car by themself.

This worked perfectly, everything from the fit of the tubing, the one way valve, and the magnet. This was my first time bleeding brake lines and it was a breeze.

This bleeder bottle worked great! Good quality hose - not cheap vinyl - so it slips onto the bleeder nipple securely. Magnet holds the bottle easily. It is nice to have the second person watching the line for bubbles, but with this check valve you can do it by yourself.

excelente producto, facilita mucho el trabajo

Holds adequate amount of old liquid- had to empty once during process. My seven year old vehicle had never had the brake fluid changed. This simple setup allowed me to do the job myself. Make sure plastic tube is securely fitted over bleeder valve or you will get some fluid dripping below on the floor. Check valve eliminates need to open/close valve after every depression of the brake pedal.

This is awesome for brake jobs. The magnet attached to the bottle is very handy. Stick it to the rotor and you don't have to worry about tipping over the bottle. The choke valve didn't work very well for me so just a heads up for anyone doing this as a single person. Hoses attached are snug on the bleeder value so no complaints on the hoses

Works perfectly. I wasn't sure if it would be worth it over the homemade water bottle version but it is. The check valve makes it fool proof while pumping the brakes, the magnet let's you attach it too the rotor and the second nipple gives you a spot to put the tube afterwards so there's no drips. Saved a whole bottle of expensive brake fluid cause I was able to top it back up with the clean fluid I collected and I had no problem seeing the air bubbles through the silicone tubing

It’s got a good quality feel to itOffers a good sealEasy straightforward useGood ValueFits tight on the bleederWorks well when doing it on you’re own

This product is really good and simple. Quality is excellent for what I needed it. Simple, cheap, easy brake bleeding job.

Works really well, no complication, nothing crazy instructions to follow. Get this one instead of those pressurized thing. Its my first time ever to do brake fluid flush and it took me 45minutes and its all done.

It is simple to use.It will be better if proper procedure manual provide with this pack..

If this review provides the info you need before buying, please consider marking it "Helpful", as that's very helpful for reviewers!Pros:- magnet is good and strong. I bled my full brake system, filling the bottle completely, and it was stuck to the rotor rock solid even when completely full.- good capacity, enough to fully bleed the brake system of most cars all at once.- no leaks. The whole thing feels sturdy and durable, while being lightweight and small footprint.Cons:- it would be nice if the hose were less opaque, so you could see bubbles coming out.I have speed bleeders installed on my car, so bleeding is a one man, 10 minute job. For years, I've been using the old "pop bottle with a piece of aquarium hose stuck through a hole in the lid", and that works totally fine, but having the integral magnet and sticking the bottle to the rotor makes this process nicer, especially since I am doing this as a one man job. I don't have to worry about the bottle falling over and getting brake fluid everywhere this way, and I'm pleased to say the magnet is strong enough that I don't have to think or worry about it, just stick it on the rotor and forget about it.This was $30 well spent in my opinion, as I bleed my brakes often between track days.

I can't believe I've waited this long to get a product like this. In the past I've tried those cheap little vacuum kits from the car store, and of course I've tried enlisting the help of unwilling teenagers or spouses, and used jars, a variety of tubing around the house, and even no tubing and just a glass jar.Bleeding brakes is a piece of cake. Flushing fluid is just as easy, you just do it slightly longer. So you'd think there would be little room for improvement in something that's already so simple. Wrong. This thing is fantastic.The tube itself is silicon, which means it pops right on, pops right off and is perfectly sized for bleeders. In the past I've used more readily available PVC tubing and trust me, silicon is much better handling. Unfortunately silicon is rather opaque, but I was able to clearly see air bubbles in the tubing. I couldn't really easily tell when I had flushed out all the old fluid though, because the way my resevoir is designed I couldn't remove all the old stuff from it first, I had to just keep adding new to it and so there wasn't a really obviously "dirty, new" change: it was more dark brown fading out to yellow then eventually clear. That meant that it was a bit more difficult to see in the tube. Next time I'd like to see if there's colored fluid I can use. That way as long as I keep changing colors it will be really obvious when the new fluid has chased out.The jar can hold an entire flush, although I emptied it between wheels so I could inspect what was coming out of each one. It's translucent, and you can generally see the color of the fluid. In the photo's you can see how easy it is to tell that the old fluid coming out is dark brown (I'm a bad car owner, and I should feel bad). You can also tell that it's clearing up, although you can't quite tell if it's yellow or white. As the new fluid mixes in it can be hard to tell, particularly since the silicone tube is a bit more opaque. However, if you unscrew the lid and peek in, the tube that's inside is PVC and quite transparent so I just kept going until it seemed like I had flushed, could see some "layering" of fluids in the jar, then I'd just unscrew the lid and peek in to confirm. I suppose that is one advantage to PVC hosing - it's perfectly clear so you can see exactly what's in it, but I much, much prefer the handling of silicon tubing.The built in check valve works pretty darn well, and definitely makes it safe for 1-person bleeding or flushing. I like that the vale is on the INPUT side (the red nipple) so you can unscrew the lid while it's attached without letting air in.There's even a black nipple that you can use to attach a vacuum hose if you want. I found that to be extremely helpful, and check this out -when you're done using it, you just pop the end of the hose on the black nipples and no spills - you've closed the system !The magnet seems just strong enough. I let it get about 2/3 full at one point, and the magnet held strong. As others have said it is riveted in, so take care not to rip the plastic bottle.Every other time I've tried to bleed or flush my brakes it's been a total pain in the ass of trying to track down one of my lazy teenagers ,and then when they do finally get off their butt and come help, it's the old "ok, press down a few times, hold down, ok up". This device made flushing so easy I actually *enjoyed it*. Yes. I actually enjoyed flushing my brake fluid using this.If you do your own brake work, and you're getting along just fine without something like this - buy it anyhow because seriously you don't realize how nice and easy it can get. You wont regret it. Using this product is the first time I've actually enjoyed flushing/bleeding my brakes.