USB C Switch/USB C Spliiter with 8K Video Display, 100W PD Charging and 10Gbps Transfer

• Interface: USB-C / USB-C1 / USB-C2.
• This USB C KVM Switch is a novel and practical USB-C full-function two-way switch, and support USB3.1 Gen2 10Gbps bandwidth high-speed transmission, 8K ultra HD display video, PD 100W charging, two-way communication and one-key switch of USB3.1 signal.
• Can easily realize two USB-C computers share a display device, through the button can choose which computer to connect the display device, but also can easily realize a computer share the use of multiple external devices, such as printers, USB flash drives, video cameras, etc., saving the trouble of frequently unplugging the cable of the device.

PD 100W Reverse Charging

• USB-C1 or USB-C2 Port support PD 100W Reverse Charging.
• Use this 8K USB C splitter to fast charge type-c cell phones, laptops, and other devices up to 100W while it's working. Note: The monitor, cable, and device you use should support fast charging.

Bi-Directional USB C Switcher

• → Mode1 Splitter → 1 video source shares 2 monitors (2 monitors can not work at the same time!)
• → Mode2 Switcher → 2 video sources share 1 monitor

Product connection schematic diagram:

• Mode1 USB-C1 and USB-C2 connect to the laptop by wiring, USB-C header connect to the display, through the key switch, shared using a screen. USB-C DC/5V requires external power supply.
• Mode2 USB-C head connected to laptop, USB-C1 and USB-C2 can connect to USB-C external equipment, expansion dock, mobile hard disk, printer, etc., USB-C DC/5V needs external power supply.

Warm Tips!

• Connecting a USB-C/Thunderbolt docking station/hub is recommended.
• Need to use the USB cable to power and use standard USB-C USB3.1 Gen2 cables to connect the switch (NOT included).
• Please make sure your computer/device has at least one USB Type C port（support Data&Video&PD）before buying this 8K USB C switch.

Compatibility:

• Support multiple input devices, such as PC, Laptop, Apple TV, DVD Player, PS3/PS4, and Xbox.
• Support Monitors, Projectors, TV screens, and other outport display devices.

Use of common problems and troubleshooting methods

1. The product has been connected to the device, and the key cannot switch the fault:

1). Check DC 5V connector. If there is no power supply, please connect the power supply cable to the 5V charging head or the USB head of the equipment. After the power supply is connected, the channel selection indicator will turn on, and the button can be switched.

2). If DC 5V has power supply, please check whether other connecting lines are correctly connected, or exclude whether the connecting lines are well inserted.

3). Check whether the button can be pressed, whether the key touch control is good and effective, and whether the 1 and 2 channel lights are on. If the channel lights are not on, it is recommended to contact the service merchant to replace them.

2. The display cannot display the fault after the product connection:

1). Check whether the computer USB-C and the monitor communicate normally, and whether the monitor or display device switch the channels correctly.

2). Check that the output resolution of the computer is too high. It is recommended to set the output of the computer output resolution to the highest resolution that the display can display.

3). Check whether the computer device supports the USB-C video output function.

3. After the equipment is connected, the charging and transmission speed is slow:

1). Under the normal condition of equipment connection and communication, the speed of charging and transmission speed is related to your computer configuration and the equipment, as well as the quality of your cable.

2). Check whether your computer configuration and external equipment can run high speed transmission, Check whether your computer has the PD fast charging function. Check whether your charging adapter has the PD fast charging function.

3). Update your computer motherboard system drive, and then restart the computer to try.