Your cart is empty.
Your cart is empty.Amazon.ca Product Description
The VAC004 connects 35 mm hoses to tools that have ports for 2-1/2 inch hoses. Bosch power tool attachments help you create complete tool systems that expand the use of your power tools.
From the Manufacturer
This vacuum hose adapter connects 35mm hoses to tools that have ports for 2.5-inch hoses. It can be used with the following Bosch products:
- Bosch 4000 10-inch Worksite Table Saw
- Bosch 4410 10-inch Dual-Bevel Slide Miter Saw
- Bosch RA1180 Benchtop Router Table
- Bosch RA1200 Portable Router Table
- Bosch hose models VAC005, VAC006, VAC007, and VAC008
Ryan
Reviewed in the United States on March 6, 2025
The media could not be loaded.
JK
Reviewed in Canada on July 26, 2024
After trying all these attachments from China that don't fit, this one finally fits perfectly with my Bosch 4100XC table saw and my Dewalt 9.0 gallon Wet/Dry DXV09P vacuum.
Corey Walters
Reviewed in Canada on March 20, 2024
Just what I was looking for, perfect fit, shipped fast
Customer
Reviewed in Canada on October 11, 2024
Ça va très bien à mon banc de scie bosch et mon aspirateur dewalt DXV10S-QTA 10 GAL/38 LITRES
Alexander Szabo
Reviewed in Canada on January 19, 2024
This was exactly as described and worked perfectly. I was able to put it on my Dewalt 8.25 inch table saw and connect my Dewalt shop vac. Tried several others connectors with no luck.
Edgar
Reviewed in Mexico on July 4, 2023
The media could not be loaded.
Customer
Reviewed in Canada on June 21, 2023
Cet adaptateur fonctionne parfaitement pour le banc de scie de la série 4000 de Bosch avec l'aspirateur VAC090AH de Bosch
CR
Reviewed in Canada on May 12, 2023
Product is itself is fine, but does not fit the CM10GD 10 In. Dual-Bevel Glide Miter Saw.For the CM10GD, you need the VAC020.https://www.amazon.ca/Bosch-VAC020-2-Inch-Hose-Adapter/dp/B000WAAFXA
Harywood
Reviewed in Canada on January 4, 2023
Great fit and low cost. Perfect for my Bosch saw.
David Hughes
Reviewed in the United States on January 15, 2023
Perfect fit between my shop vac (Rigid) hose and my Bosch 4100 portable table saw.
VICENTE MANUEL GARRIDO MEZA
Reviewed in Mexico on January 20, 2019
JUSTO LO QUE NECESITABA PARA MIS HERRAMIENTAS DE LIJADO
g ranson
Reviewed in Canada on August 30, 2014
this did not fit the bosch dust cover or my shop vac
Nathaniel Allen
Reviewed in the United States on August 12, 2014
Being a Bosch product specifically for the 4100 table saw, I'm just a tiny bit disappointed. The adapter works, but...My shop vac is my dust collector, and I switch my orange Ridgid hose between my Bosch 410p and my Dewalt compound miter saw.Whereas the hose fits the Dewalt without an adapter, for the past year I've been plugging the undersized hose end into the oversized Bosch opening. Barely effective, but better that spewing sawdust into the room.This Bosch adapter fits INTO the tablesaw's exhaust port opening. Not AROUND the exterior, as I expected. This means the hose end creates a lip inside where sawdust collects. Not the worst thing in the world, but something that could have been avoided had this adapter been designed to fit around the outside of the saw's exhaust port.The small end of the adapter is an extremely tight (i.e. difficult to fit) diameter to the hose. Just another 1/32 inch in reduced diameter at the very end would certainly address this complaint. Otherwise, the Bosch adapter interfaces very nicely with the hose.Once all the pieces are fit together, the connections are tight. Dust collection is about as good as can be expected, with the exception of the small amount of build-up left behind in the the saw's exhaust port due to the lip. Disconnection, about half the time, results in the adapter being pulled from the saw, which could have been avoided had the adapter been designer to fit AROUND the saw's exhaust port.In any case, it's better than no adapter, and despite my criticisms, I'm happy have it.
Recommended Products
$20.15
$ 10 .79 $10.79