Your cart is empty.
Your cart is empty.The Cable Mount Bleeder Bottle features a stainless steel lanyard that is perfect for hanging the bottle from the bleeder screw or a lug stud. This bottle features no spill/no leak hose storage bung and bottom tube fluid entry. The large 16 oz. holds twice the fluid as those other bottles, which allows more flushes before having to empty. The Motive Products 0100 power bleeder works on most European cars, and all other cars with 45mm threaded hydraulic fluid reservoir caps (This kit includes adapter 1100). Together, these make brake bleeding clean and easy, without involving another person!
Liejen
Reviewed in Canada on May 15, 2024
Didn’t work to my ram1500 waste the money to buy
kurtdale
Reviewed in Canada on April 25, 2024
Best things for one man brake bleeder,Work as describe, use on 2015 BMW X5
Tim
Reviewed in Canada on July 15, 2023
Don’t pay extra for the bottle. The tip that holds the hose when you’re not using it broke after one use
Customer
Reviewed in Canada on March 4, 2022
Very good Product for VW Tiguan 2017 Wolfsburg Edition. But the pressure needs to be released when switch to different tires; otherwise it may cause brake fluid leaking between connections
Bobby
Reviewed in Canada on March 28, 2022
It’s an ok device for bleeding. Two issues I have are a ton of blue grease from the pump gets in the fluid , also the brass fitting are a pain to connect as you have to twist the entire pump and housing with it and same goes for the cap for your reservoir. Not flexible
Beoblorf
Reviewed in Canada on January 26, 2022
Save yourself a ton of money and time by flushing your brakes (and clutch on a manual transmission) on your own using this brake/clutch bleeder set.I would recommend choosing the magnetic option for the dirty flood catch bottle to stick to a rotor or hub rather than the wire loop, and look up a good YouTube tutorial for your car to save a ton of money.Just make sure you tilt the pressurized container so the fluid is pooling on the side where the pickup is located to avoid running low and sucking air into the system, and if you have brakes with a dual circuit on the caliper (e.g. Brembo's with 2 bleeder nipples), make sure you flush the outer circuit first and don't forget the inner circuit as well.
hjshop
Reviewed in Canada on July 7, 2021
Very happy with the Bleeder. I's well made and worked precisely as described. My only wish is that it had a bleeder valve instead of unscrewing the cap to release the pressure.
Tom T. N.
Reviewed in Canada on April 8, 2021
Bought this as it was claimed to be all in one tool for most vehicles but the adapter came with the unit only fit a BMW. Seller should make it less confusing. Will not recommand
Recommended Products