Your cart is empty.
Your cart is empty.Product Description
Nema24 3N.m Closed Loop Servo Motor & 2HSS60 Servo Driver CNC Kit
Package include:
- 1 x 24HSE3N-D25 Nema24 3N.m Closed Loop Servo motor ( 60x60x88mm Length, 5A)
- 1 x HSS60 Servo Driver
- 1 x 2M Extension Wire
- Pdf. user manual
Specific
- Size:60x60x88mm
- Current :5A
- Phase:2
- Step Angle(degrees):1.8 degree
- Lead wire:4pcs
- Holding Torque:3N.m
- Resistance:0.5±10%Ω
- Inductance:1.8±20%mH
- Insulation resistance:100MOhm(500V DC)
- Insulation Class:B
Dimensions
1.2.1 Stepper motor closed loop system, never lose step.
1.2.2 Improve motor output torque and working speed.
1.2.3 Automatic current adjustment based on load, lower temperature rising.
1.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need
to adjust gain parameter.
1.2.5 Motor work smoothly and low vibration, high dynamic performance at acceleration and
deceleration.
1.2.6 No vibration from high speed to zero speed
1.2.7 Drive nema 24 series 3N.m closed loop stepper motor.
1.2.8 Pulses response frequency can reach 200KHZ
1.2.9 16 kinds microsteps choice, highest 51200microsteps/rev.
1.2.10 Voltage range: DC24V~50V
1.2.11 Over-current, over-voltage and position ultra difference protection function
HSS60 Servo Driver
- Voltage range: DC24-50V
- Peak current :Peak 6.0A
- Logic input current:7-20mA
- Frequency:0-200KHz
- Suitable motor:57HSE76-2N
- Encoder lines:1000
- Insulation resistance:>=500MΩ
- Operating temprature:0~50℃
- Operating humidit:40~90%RH
- Virbration:5.9m/s2Max
- 2HSS60 is 2 phase nema 24 series hybrid stepper servo driver. It adopts new generation 32 bit DSP
- and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor.
- The torque reducing is much lower than open loop stepper motor when it is at higher speed.
- The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor.
- The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely.
- The closed loop system is an ideal improvement and a good replacement of open loop system.
Attention:
- This 2m extension cable of this encoder must be connected during use.
Wiring diagram
Kyle
Reviewed in Canada on March 5, 2023
I'm really impressed, feel really well built. The servo feature is nice too. No more lost steps.Alarm outputs that you can tie into your motion controller to trigger estop if there's an issue with one or more of the steppers.Quick visual inspection of the circuit board internals doesnt come back with screaming red flags.. all in all worth the money IMO.
Mario
Reviewed in Canada on April 9, 2023
The media could not be loaded.
Recommended Products