Your cart is empty.
Your cart is empty. These DB44 Male Solderless Connectors are used to terminate the connection type of a cable. They can easily be connected to a custom length cable as well as create a custom pinout, creating a permanent and durable connection for all applications. These connectors are made with high-quality materials to ensure durability and a long life.
Technical Specifications:
Name: DB44 solderless module
Plug type: Male
Connector material: Pure copper nickel plated joints
Contact Material: Copper
Terminal block diameter: 0.08'' / 2mm
Pitch: 0.15'' / 3.81mm
Cable Specification: 0.15mm²~1.5mm²/26-15 AWG
Strip length: 5-6mm
Torque: 0.2Nm (1.7Lb-In.)
Rated voltage: 24V
Rated current: 2A
Application: tax control machine, digital camera, PLC, PDA, MODEM, set-top box, barcode machine, industrial instrumentation, etc.
Size: 82.4 mm×52.8 mm /3.24″×2.08″
Package includes:
1 x DB44 Male Solderless Connectors
Zero Signal
Reviewed in the United States on February 12, 2025
I used this connector to make a breakout board for diagnosing a piece of equipment at work. One particular piece of test equipment that I help to support uses a DB44 cable to send signals out. I needed to look at these signals on an oscilloscope but didn't want to hack up and strip a 44-conductor cable to do it. Those wires are tiny-- they're hard to strip, easy to break, and even easier to short out if there's 44 of them hanging out in close proximity.For less than $20 I was able to put this on the end of the cable and hook the scope probes into the terminals I needed to check. Way less work and now I can look at any signal that comes out of this piece of equipment. This adapter is a real lifesaver but is not always easy to find. I'm glad I could get my hands on one because it saved me a ton of time.
Chase
Reviewed in the United States on November 24, 2024
Male side should have self contained screw not a nut...
Phillip M.
Reviewed in the United States on March 18, 2022
Used these on a cnc project, wiring up a stepper motor drive. Good quality. Only problem I had is that the metal tab surrounding the actual plug end is threaded instead of a thru hole. Basically it was impossible for me to secure these onto the motor drive because both parts were threaded instead of one threaded and one drilled through for a screw.
Recommended Products
