Shopping Cart

Your cart is empty.

Your cart is empty.

DTECH RS232 to RS485 / RS422 Converter Adapter for Industrial Long Haul Serial Communication Supports up to 115.2 kbps Mini-Size

Free shipping on orders over $29.99

$13.67

$ 5 .75 $5.75

In Stock

About this item

  • Pro grade RS232 to RS485 / RS422 converter. It easily lets you connect any RS485 or RS422 device directly to COM port.
  • Best solution for the communication between serial port and RS485 or RS422 device.
  • Unique serial charge pump drive technology, no external power supply, the real three-wire communication (TXD,RXD,GND). No need serial port initialization.
  • Supports baud rates up to 115.2 Kbps; Automatic sense serial signal rate.
  • Supports a maximum connection distance of 4000ft (1200m)


One-stop solution for all your connection needs
In order to facilitate the allocation of a different standard computer serial interface, external devices or between the intelligence apparatus for remote data communication, the need for standards conversion of the serial interface.
Convert an RS232 data signal to RS485 or RS422
The DTECH Industrial RS232 to RS-422/485 Serial Converter is a bi-directional adapter that lets you adapt an RS232 data signal to either RS485 (2 or 4-wire) or RS422 and vice-versa, with support for baud rates up to 115.2 Kbps. The adapter supports auto baud rate detection as well as RS-422 and RS485 mode detection, and supports connection distances of up to 4000ft (1200m).
It is suitable for most applications, including industrial, commercial and any general office computer device.
Specific
Compatible with RS232C,RS485,RS422 TIA/EIA standard
Baud rate: 300bps to 115.2Kbps
Automatic send / receive data, without external flow control signals.
Zero delay automatic transmission
Supports multiple terminals up to 32 RS-485 or RS-422 devices
Transmission distance: up to 4000 Feet (1200 meters) for RS-485/422 end
Power supply: Unique serial charge pump drive technology, no external power supply.
Working modes: Asynchronous half-duplex(RS485) or asynchronous full duplex(RS422),no need jumper wire settings.
Transmission media of RS232 Data Converter: twisted pair or shielded twisted pair ( STP ).
Mini-Size:64mmX33mmX17mm
Original Packing Included
1 X DB9 Female RS232 to RS485 RS422 Communication Converter
1 x Terminal Board


yogesh rajendra godbharle
Reviewed in India on September 29, 2024
3rd class quality & waste my time & cost, please don't buy. If needed then u can go with standard make
Ian
Reviewed in Australia on September 18, 2024
They are very easy to connect. Make sure you test the connection on the bench before installation
Ivan Moreno
Reviewed in Mexico on May 10, 2024
Yo lo uso para hacer pruebas en oficina y en campo, es muy bueno. Se ve de buena calidad, lo que si no puedo saber es la durabilidad, pero se ve que es buena
Teri L.
Reviewed in Canada on February 28, 2022
Installed for a few weeks and worked great. Quit working after a month.
Dominic Plourde
Reviewed in Canada on November 29, 2021
Bien
just another customer
Reviewed in Canada on October 14, 2021
unit is nice and works as expected. no complaints there. tested at different baud rates etc. it is all good. the 5mm screw terminals are large and easy to use - much handier than 3.5mm on some other units.but it could be better (and reason for only 4 stars):* there are no LEDs to indicate power, and send/receive activity. LEDs are cheap and there is no excuse for it.* it requires supply that is 6V-9V. some other products from same manufacturer use 5V-30V and i it would be great if this one would too.* terminal labels are not easy to read (green on green, obscured by terminals and wires). More over they are marked with generic "GND" and "VCC". one day when manual is not at hand, not many will remember that VCC is actually 6-9V.
T. Carter
Reviewed in the United States on October 14, 2021
Works with an old Expedite synthesizer with RS422 connector. Saved a lot of money.
Customer
Reviewed in Canada on January 13, 2021
Had to extend length of old RS-232 network to 900 feet at 19.2 kbps half duplex. That was a perfect budgetary solution. Had to add bias resistors and no running required.
Mike G.
Reviewed in the United States on April 4, 2021
Unlike another one I bought that claimed to do both 2-wire RS-485 AND 4-wire RS-422, this one actually does both standards very well. Connects every time and works like a champ. Highly recommend.
Dominic Boucher
Reviewed in Canada on October 15, 2020
works well
M. Fischer
Reviewed in Canada on January 23, 2020
Tested it at 19.2 Kbps and works great. No need for an external power supply as it is powered by the RS 232 port.
Customer
Reviewed in Canada on June 7, 2019
I've tried a few other cost effective adaptors and this is the only one I've found that doesn't have issues with certain equipment.
Patrick Plante
Reviewed in Canada on January 14, 2019
Qork great ! Very easy to use !
Recommended Products

$34.55

$ 17 .27 $17.27

4.7
Select Option