Your cart is empty.
Your cart is empty.Product Description
Description:
- Support GPS/Glonass/Beidou 3 signals
- Support Windows 10/8/7/Vista/XP/CE，linux
- Support Google Earth/Ovi Map
- Built-in flash, USB power supply, default baud rate 9600, 1Hz output, NMEA-0183 protocol output
NMEA-0183 protocol output
- GGA: Time, Location, Location Type
- GLL: Longitude, Latitude, UTC Time
- GSA: GPS receiver operation mode, positioning satellite, DOP value
- GSV: Visible GPS satellite information, elevation, azimuth, signal-to-noise ratio (SNR)
- RMC: Time, date, position, speed
- VTG: Ground Velocity Information
Precision:
- Horizontal Position: Autonomous<2.5m average SBAS < 2.0m average
- Timepulse signal: RMS 30 ns
- Maximum height :50000 m
- Maximum speed :500 m/s
- Maximum acceleration :≦4G
- Update frequency :1-10 Hz
- Dimensions :60X24X9mm
- Operating temperature: -40°C to 85°C
- Storage temperature :-40°C to 85°C
Applications:
- Android and ios systems are not supported.
- For Linux, it is plug and play gps
- For Windows, please download and install drivers
Sensitivity:
- Tracking: -164dBm Capture: -159dBm Cold Start - 147dBm
- Cold start Average :26 seconds
- Warm start Average: 24 seconds
- Hot start average :1 second
Luis M.
Reviewed in Canada on March 11, 2025
Seems to work fine, but there's no documentation, etc... For those wondering, it doesn't show up as a device in Device Manager in Windows, it shows up as a COM port. Software that use GNSS expect the data to come over a serial port, so it all works. It was confusing at first because of the lack of documentation, and I guess being new at this didn't help.So for those wondering, you do not need to install a device driver or anything, just plug it in, and the software should simply find the data on the COM port. Enjoy!
Sailing Sonas
Reviewed in Canada on February 3, 2025
No go
Michael K.
Reviewed in Germany on September 12, 2024
Top!
marfree
Reviewed in Canada on June 9, 2024
gets an extra star for fast gps refresh rates for glonass positioning with up to 12 satellites tracking in rural steep mountain to ocean environment. shipping was capped usb in bag bubble pack good.
Len O.
Reviewed in Canada on December 23, 2023
There are very few places I could get this to work. even a layer of fibreglass was too much for the antenna and no connector to add even a length of wire to help. The remote round pucks seem to be better all around.
Roberto Piccione
Reviewed in Italy on September 3, 2022
Sensibile alla ricezione
Billy D Stephenson
Reviewed in the United States on October 27, 2022
I bought this to aid in mapping our water and sewer for our town. I’m the water and sewer operator and we had a bunch of old maps but it’s just a shot in the dark tying to find anything. So I’ve been using this to help mark our assets more accurately. This will get it closer for the next person to locate. I don’t really have a Trimble unit to compare it too but it’s close in Google which is what our mapping software is based off of. I use an iPad Pro 12 with this and a cellular data plan and it works great for us.
Andrew edwards
Reviewed in Canada on January 24, 2022
Device worked as advertised after figuring out the right drivers to use. Windows driver selection by default instantiates the device as a "Sensor" instead of a virtual com port. In theory this should work using windows Sensor API but for most users, they just want the classic NMEA feed on a com port.Following steps had me up and running as expected:follow the below steps to set it:- open Device Manager- find the GNSS locations sensor- right click and select "update Driver Software"- Browse my computer for driver software- Let me pick from a list of device drivers on my computer- select "u-blox GNSS receiver" in the listI'll buy some more of these.
Zathras
Reviewed in the United Kingdom on October 2, 2021
I like the cheerful green LED on this dongle. It is configured for American GPS and Chinese BeiDou satellites It may be possible to re-configure in Windows using the Ublox U-center program but I don't know how.As another reviewer stated, you must use a USB 2 socket, not USB 3.I am using this on a Linux computer for Network Time Protocol. The jitter of the NMEA sentences is amazingly low at a millisecond or less. Not something the average user would care about except as an indication of excellent hardware and software.Linux detects the pulse per second output from this dongle but I have not found a way for NTP to use it. Again, not a thing most users would care about at all.I have this on a 2 metre Amazon USB extension cable in an attic window.On a Raspberry Pi or Linux computer you can install gpsd and gpsd-clients and then use xgps to watch a diagram of the American and Chinese satellites in the sky.I intend to get another one of these.
rhithyn
Reviewed in Canada on October 15, 2021
I have had this dongle work on Windows 10 and a Raspberry Pi 4. Note that it will not work on a pi 4 if the USB 3 connections are being used for data drives due to an interference issue with the pi 4s using usb 3.
Joan F
Reviewed in Spain on September 17, 2020
Funciona muy bien pero debemos estar cerca de una ventana para que capte bien la señal.Si estamos algo lejos se puede emplear un cable alargador USB.
Steph
Reviewed in Canada on November 22, 2020
Not working under Raspberry pi 4b OS or Ubuntu. Led green for power then nothing. Returning it.
Recommended Products
$564.47
$ 71 .28 $71.28