Shopping Cart

Your cart is empty.

Your cart is empty.

Herdio in Wall Bluetooth Amplifier for Home Speakers, 4 Channel Receiver Wall Plate with USB/Microphone/AUX(3.5mm)/MIC Input

Free shipping on orders over $31.42

$51.82

$ 24 .13 $24.13

In Stock

About this item

  • ♥【Easy to install】Install the wall amplifier system on any wall in the home or office to unlock versatile sound configuration that is easily accessible. 16BT-4CH offers flexibility, power, and control all in one small and discrete package
  • ♥【Compatible with Bluetooth】Built-in Technology allows you to stream audio wirelessly to a connected speaker system; Countroller receivers&Directs wireless audio works with all of your favorite device. Wireless range:30' Feet(10 Meters)
  • ♥【Connecting Audio】Line level audio is typically supplied via the front 3.5mm input jack pigtail leads located on the rear of the amplifier receiver wall plate
  • ♥【Updated features】Microphone paging and speakers control made easy. USB port allow you easily access to music stored on a flash drive. Aux input port plug&play smartphones and other music device; Dual Independent 4 Channels: connect up to 4 speakers
  • ♥【What is in the package】1x in-wall audio receiver wall plate,1XAC adapter,2Xscrews. Note: make sure The unit is properly connected to external speakers;make sure the unit is properly connected to a power source



Product Description

amplifier for speakers

Technical Specs:

  • Power Draw:12V 3Amps
  • wireless range of 30+ feet.
  • Power Output: 100 Watt Peak, 40 Watt RMS x 4 Ch. @ 4 Ohm
  • Bluetooth Version: 5.0
  • Mic Input Type: Dynamic
  • Power Amp Type: Stereo Class-D
  • Minimum Load Resistance:4 Ohm
  • T.H.D.:0.03%(8 Ohm,1KHZ)
  • Power:DC 100-240V,50/60Hz(12V DC Adapter)

Built-in 4 Channel Wall Amplifier

Stereo bluetooth amplifier comes with built in technology which enables connection to any intercom or speaker system , Compatible with all of today's latest smart devices(iPhones, iPads, iOS & Androids smartphones tablets, PC, Laptops, Desktops, etc.) and a wireless range of 30+ feet.

Network Name: ‘Herdio’(No password required)

  • INPUT SELECTION: Audio Input between AUX/B T/MIC
  • USB PORT: USB Card Reader&USB Charge(5V 1A)
  • 5.0 BT: Signal LED; BT Wireless Music function allows you connect & Stream
  • VOL UME/ON/OFF: Master Volume Control with Power ON/OFF
  • MIC IN: 1/4 Microphone Input Connector Jack
  • AUX IN: (3.5mm)Audio Input Jack can Connect&Instantly Stream Audio From your Favorite Devices.

amplifier for ceiling speakers

USB PORT:

The audio controller features USB flash memory reader for media playback which also doubles as charging port for your devices.It can also be used for phone charging.

ceiling speakers bluetooth wireless system

Compatible with Bluetooth:

Enjoy wireless music streaming thanks to built-in wireless connection. Works with all of your favorite player devices (like iPhones, Androids, Smartphones, iPads, Tablets, and more). Instantly stream your favorite tracks and internet radio services like Pandora or Spotify. It's easy to setup and control! Gain access to your music library and play exactly what you want to hear.

bluetooth wall amplifier

Microphone Paging and Speaker Control:

Take control of your audio system. With this easy to use in-wall plate amplifier you can control the volume of your sound as well as have multiple inputs that connect to your stereo system/speakers. Microphone paging is also easy to do. Perfect for making announcements or paging someone in the office.

bluetooth receiver

LED Indicator Lights:

LED indicator shows the connection status. Upon pairing,the LED indicator light will blink progressively quicker until the unit successfully pairs with a compatible device.When a successful connection is established,the indicator light will shine solid and indicating that the unit is ready to transmit audio.

1

EASY to install:

Install the wall amplifier system on any wall in the home or office to unlock versatile sound configuration that is easily accessible. Note minor fitting adjustments may be necessary for mounting the wall plate amplifier receiver in certain wall installation applications

1

2 Ways to Connect Power:

The Wall Amplifier Can Be Hard-Wired or Powered via Included Power

1、Plug the adapter in the box directly into the power jack on the front of the panel, and connect the other end to the 110-220V power supply.

2、There are two wires in the 16BT box, 2-pin wire and 3-pin wire. The 2 colors are connected to the DC12V power supply, and the 3 colors are used for AUX connection.

in wall amplifier

Customer
Reviewed in Canada on March 5, 2025
Mediocre at best
Laura keck
Reviewed in the United States on March 5, 2025
Easy to install and works well.
AmeliaM
Reviewed in Canada on March 3, 2025
Easy to install, good quality. We use it with our 4 speakers in our converted camper van, on 12V. It was easy to install and works great.
Nathan
Reviewed in Canada on February 7, 2025
Works great!
Benji
Reviewed in Mexico on February 11, 2025
Muy bueno
liranomi
Reviewed in Canada on January 24, 2025
Bought this in November 2024. Waited till I had time off in December to install with the Herdio 6.5 inch 640 Watts Ceiling Speakers i bought a year earlier. The bluetooth works. The Aux in works. However the sound is flat. The music sounds awful because the sound is so flat. This setup may work for voice only. However for music this setup is brutally bad.
NJ lightning
Reviewed in the United States on March 31, 2024
Works well, and makes my customers happy
MGD
Reviewed in the United States on March 25, 2024
We installed this bluetooth receiver in our kitchen, with a speaker in the powder room.It'd have been great if there were a way to turn on and off using the phone, but I took care of this by routing the adapter into a utility closet, and plugging it into a wifi outlet.I also added a switch on one of the speaker wire runs to allow the bathroom speaker to be turned off, leaving the other three on - that' works great - would have liked there to be a way to turn on and off on the system itself, but for the price, I'm good with the workaround! The sound is fantastic for the price.
Carlos
Reviewed in Mexico on November 22, 2024
El cargador del amplificador no funcionó, lo bueno que tenía uno de la misma entrada y si sirve el aparato pero el cargador no.
Rick
Reviewed in Canada on November 14, 2024
This Bluetooth amp was perfect for me to convert an old valve radio into a Bluetooth speaker
Y. M.
Reviewed in Canada on January 27, 2024
I bought this item mainly for the bluetooth function, but unfortunately, it wasn't working properly, and I returned the item. For the price point, I wasn't expecting super high quality, but at least a fully functioning unit. That said, I was able to test the sound using another function on the unit - mini connector - and the sound quality was good. But as I said, it was the bluetooth function that we were interested in, and that wasn't working. Returning the unit was easy and free.