Your cart is empty.
Your cart is empty.QuicRun 1625 Brushed ESC;Water-proof and dust-proof for all-weather races.;Model / SKU QUICRUN-WP 1625 BRUSHED/30105025001;Fwd Cont. Current /Peak Current/ Resistance 25A/100A/0.003ÃŽ;http://www.HobbywingDirect.com/products/quicrun-16-esc-brushed
Mike Miller
Reviewed in the United States on August 4, 2024
Like all Hobbywing ESC's this one is perfect if you use it for it's intended purpose. It's only rated at 25 amps, so it's best for lightweight models such as 1/14 and smaller. I put this one in a 3DSets semi, and it works perfectly for that purpose. I've never had any issues with any of my Hobbywing ESC's, and I have a bunch of them. You can't go wrong choosing their products to power your models.
Umid Abdullaev
Reviewed in Canada on July 25, 2024
Tested and working perfectly. The packaging and fit and finish scream quality. I will be using it on my dromida sc4.18 truck.
lance
Reviewed in Canada on March 22, 2024
Great small size for 1/24. works very well. im using it on a drift car. 2s lipo no prob
Jay
Reviewed in Canada on December 1, 2024
I’ve been using the Hobby Wing Quicrun 1625 ESC in my scx24, and it performs really well. The compact size makes it easy to fit into tight spaces, and it provides smooth and consistent throttle control. The setup process was straightforward, and the ESC works flawlessly with brushed motors.While it’s a solid product, I’d love to see a bit more customization in settings or additional features for advanced tuning. Overall, it’s a great value for anyone needing a reliable speed controller for small-scale RC cars.
Tam As
Reviewed in the United States on November 1, 2024
Reliable, small package (a little bigger than expected for a 1:18 custom built buggy, but the size is not really a worry). I ran into 2 main issues:- the reverse MAX and forward MAX speeds are extremely different (reverse is - no EP programming on the ESC, most ESCs allow you to put the device into EP programming by adding power with high power, then set the low and high points. So if your radio's default EP's are a bit different than others, then you can still get the best out of the ESC. Instead this ESC will just take the power-on throttle as mid-point and you're up for a big surprise when you let the throttle go after it initialized with a high throttle (will get a full blast reverse).Because of these I'm still thinking of getting a different ESC that I will use long-term.
Chris
Reviewed in the United States on October 29, 2024
Another good product from hobbywing. Fit my rc vehicle well and with better specs. I would purchase again if needed.
Jacob Taylor
Reviewed in Canada on January 29, 2024
Ive seen many ppl run this and works amazing, mine doesnt even power on, very disappointing not impressed as its brand new and not able to be used, customer service on item is a complete hassle to deal with no actual people all rebots
Inspector M
Reviewed in Canada on March 9, 2023
Small size, fits perfectly upright, back-to-back with a receiver, in place of the combo unit that originally came in the FMS Atlas 6x6. It’s much smoother and quieter than stock. Just one downside: it ONLY has forward/brake/reverse. That can make it somewhat awkward for crawling. The 1060 has a forward/reverse mode, but it’s physically larger.
Robert P
Reviewed in Canada on December 1, 2023
Not much to say, always great Hobby Wing.
Paul
Reviewed in the United States on November 19, 2023
The media could not be loaded.
LosServitore
Reviewed in Canada on April 10, 2023
Even if not a real crawler ESC it Works like a charm in the SCX24. Plenty of power ans very smooth opération. Smoother than stock Axial V2 electronics. Quieter and smaller footprint. Definatly an upgrade over stock ESC
Ryan Moore
Reviewed in the United States on July 12, 2022
Used this brushed esc in my sons redcat volcano 16. The little truck came with a 2 in 1 esc/receiver combo . Because of that , it came with a five wire servo. We have two of these trucks for our boys and both have had steering issues from the get go. I used this new Hobbywing esc to replace the stock one. I was also able to get a better , three wire servo, and better transmitter/receiver combo . The truck has much better acceleration and I’m getting longer run times out of the batteries. The esc is staying nice and cool under hard use as well! The only thing that could be better is to be able to adjust the esc settings . It has the jumper to switch from nimh to lipo batteries but that’s it. No punch settings or voltage cutoff adjustments to be had. Although I understand cause it was a cheaper esc . Definitely still worth the buy!
Miguel Mohammed
Reviewed in Canada on November 11, 2022
Great upgrade... And it's waterproof! I'm s trying to figure out wire routing but added a picture of it on a stretched deadbolt chassis for size comparison. Smaller footprint than the stock esc/reciever unit and feels much lighter with my hand scale v
Recommended Products
$194.38
$ 71 .28 $71.28