Shopping Cart

Your cart is empty.

Your cart is empty.

HZAUTOS 14PCS Radiator Pump Pressure Tester Tool Kit for Automotive Cooling System Water Tank Leakage Detection and and Pneumatic Purge Filling (Red)

Free shipping on orders over $29.99

$38.15

$ 17 .99 $17.99

In Stock
  • Durable Construction Design: The radiator pressure test tool is provided with an alunimum pump cylinder, a 21" rubber nylon resin hose, φ3" large dial gauge and a brass fitting on the end. It is durable and solid designed.The large dial gauge with index range 0 to 35 psi (0-2.5 bar) is easy to observe. The Chrome plated quick coupler is designed with relief valve, which is easy to connect to radiator adapters quickly
  • Advanced Function: The pressure leak tester tool kit is perfect for detecting the internal and external leakage of cylinder, as well as detecting head gasket failure to find out which side is blocked or which cullinder leaks. You can avoid the issues resulted in the coolant and boiling point reduction, such as high engine temperature, low oil viscosity and other serious issues by regular checking with the tool
  • Easy Operation: It is easy to operate the water tank leakage detection tool, usually takes about 10 minutes to detect the leakage. You can select an available radiator cap and install it on the radiator opening, then operate the handpump until the pressure is up to 10-15 psi (note: not up to 35 psi). Then please notice the gauge reading, if the reading drops automatically, it means that it leaks in the radiator. The radiator system needs to be inspected and repaired if necessary
  • Necessary Accessories: The coolant tester kit includes 1* hand pump with pressure gauge, 8* anodized plastic cap adapters, 4* Chromed steel cap adapters, 1* thermometer and 1* carrying case. All the adapters are distinguished by different colors and numbers marked on it, which is easy to be selected without any confusion. The index range of thermometer is 0 to 200℃ (32 to 400℉)
  • Wide Applications: The radiator pressure tester kit is provided with 12 pcs of different cap adapters. 4* Chromed steel cap adapters are designed for trucks and 8* anodized plastic cap adapters are designed specifically for cars. Noted that it is not compatible for BMW e46 Expansion Tank



Product Description

pressure leak tester kit  A+ 1

HZAUTOS 14PCS Pressure Leak Tester Tool Kit

A full set of cooling system leakage test kit with functions of leak detection and temperature measurement

FEATURES:

1. Durability and good air tightness with strong construction

2. Universal applications with different sizes of adapters

3. Easy adapter selection in the separate position of case

4. 18” Rubber nylon material weave reinforced hose for good air tightness and anti corrosion

5. 3” Large dial for easy reading

NOTE

1. Please wear gloves and goggles when use

2. This coolant pressure tester and refill kit should be used by professional or under the guidance of a professional

3. Always refer to equipment manufacturer's operation instruction, compare to the manufacturer's recommended readings

PACKAGE LIST

  • 1* Hand pump with pressure gauge
  • 8* Anodized aluminum cap adapters
  • 4* Chromed steel cap adapters
  • 1* Thermometer
  • 1* Carrying case
pressure leak tester kit A+ 3

PRODUCT SPOTLIGHTS

gauge A+ 4

Radiator Hand Pump

The radiator hand pump is produced with good-quality aluminum and brass quick coupler, which is easy to connect to radiator adapters quickly. It is installed with a φ3" pressure gauge, which shows the range of 0 - 35psi (0 - 2.5bar).

8 radiator tester adapters A+ 6

8pcs of Aluminum Radiator Tester Adapters

The 8pcs of radiator tester adapters are made of aluminum, all the adapters are distinguished by different colors and numbers marked on it, which is easy to be selected without any confusion.

4 radiator tester adapters A+ 7

4pcs of Stainless Steel Radiator Tester Adapters

The 4pcs of radiator tester adapters are made of stainless steel, all the adapters are distinguished by different shapes and numbers marked on it, which is easy to be selected without any confusion.

thermometer A+ 5

Stainless Steel Thermometer

The thermometer is made of stainless steel, the coolant temperature can be measured in real time accurately. The index range of thermometer is 0 to 200℃ (32 to 400℉).

WIDE APPLICATIONS


Customer
Reviewed in Canada on February 3, 2025
good
Boris
Reviewed in Canada on February 28, 2025
Looks like a good unit for the money.
Steven A Holmik
Reviewed in Canada on July 21, 2024
Only used the one cap so far. It was a bit fiddley to get it to seal initially but all good in the end.
Moorcroftmechanical
Reviewed in Canada on March 26, 2024
Was able to pressure test Toyota Van and pin point the cooling leak prior to tear down. Also fit Polaris ATV rad. The unit is well equipped for many applications at a very reasonable price ….Thanks
Tquinn
Reviewed in Canada on November 17, 2024
Bought this a while ago just in case I might ever need it. The attachment meant for my car did not fit properly and would leak as I would try to pressure it. Just spend the extra money and get a better quality one.
Customer
Reviewed in Canada on October 8, 2024
I’m long retired as a technician. I recently purchased an Amazon engine compression tester to replace a Snap-On unit I’ve had for 40 years. I was quite happy with my purchase for the price.I decided to try the cooling system pressure tester, and I’m equally happy with my purchase. Great value and got the job done.
Customer
Reviewed in Canada on October 19, 2024
Good , happy with it. Thanks
Paul McCann
Reviewed in Canada on January 7, 2024
should be easy to use with all the adapters. I had to buy an adapter for my Range Rover that cost $80.