Your cart is empty.
Your cart is empty.Product Description
Inkbird Digital Thermostat ITC-308 & IHC-200 Humidistat Combination with Temperature Humidity Sensor
ITC-308 Temperature Controller 2 Stages,Dual Relay Outlet with Temp Probe 1100W Control Heater Cooler Switch
- Dual relays output,supports control the heating and cooling devices at the same time.
- Be able to display measuring and set temperature at the same time.
- Supports °C/°F change,temp calibration.
- The thermostat will save all settings even it was power outage.
- Programmable,control heater or fridge on/off automatically; plug and play,easy to set up.
- Over-temperature alarm, sensor fault alarm, high and low temperature alarm.
IHC-200 Humidity Controller Dual Relay Stages with Humidity Probe Control Humidifier and Fan For Grow Tent
- Dual relay outlet,the humidistat can control the humidifier and dehumidifier on or off automatically at the same time.
- Programmable,easy to set up. Supports humidity calibration.
- Dual display windows,show measuring and set RH value together.
- Be able to save all settings even it was power outage.
- Sensor error alarm; alarm when humidity exceeds limit; high and low humidity alarm.
Package:
- 1 x IHC-200 Humidity Controller
- 1 x IHC-200 Humidity Controller Maual
- 1 x ITC-308 Temperature Controller
- 1 x ITC-308 Temperature Controller Maual
- Including temp and humidity probe
IHC-200
- Humidity Measuring Range: 5%-99.99%RH
- Humidity Control Range: 5%-99%RH
- Resolution: 1%RH
- Accuracy: ±3%RH
- Sensor Length: 2m / 6.56ft
Voltage
- Power Input: 100 ~240VAC, 50Hz/60Hz
- Power Output: Max. 10A, 100V ~240V AC
- Power Consumption: <3W
Package
- 1x IHC-200 humidity controller
- 1x Manual
ITC-308
- Temperature Control Mode :On/Off Control, Heating and Cooling
- Temperature Control Range : -50~120 °C / -58~248 ° F
- Temperature Resolution: 0.1 ° C / 0.1° F
- Temperature Accuracy: '±1°C (-50~70°C) / ±2°F (-58~160°F)
- Sensor Length: 2m / 6.56ft
Voltage
- Input Power: 100 ~240VAC, 50Hz/60Hz
- Temperature Control Output: Max. 10A, 100V ~240V AC
- Maximum output load: 1000W(110V)/2000W(220V);
Package
- 1x ITC-308 temperature controller
- 1x Manual
Temperature and humidity controller keep accurate temp and RH
Multipurpose:
- ITC-308 thermostat can be used for home brewing, repetile incubator,snake tank, beer fermentation chamber, cheese making, bacon, curing meat or sausage, hatching eggs, greenhouse planting, pet, sous vide and so on.
- IHC-200 humidistat widely be used for mushroom, garden plants, ventilator fan, reptile enclosure, indoor grow tent, crawl space, snake rack, grow room etc.
- The temperature and humidity controller combination will be more smart and convenient for people to keep a stable environment.
- The temperature and humidity controllers are easy to set up to run and will save you energy and time.
- Keeps your RH and temp are optimal levels no matter what stage your plants(or others) are in.
nawick
Reviewed in the United States on February 2, 2025
The temp control worked great in the cat house. Set it up with a heating pad and the outdoor cat stays warm
Xavm
Reviewed in Canada on January 26, 2025
Excellent contrôle, câbles très fin, passe dans une porte de petit frigo. Installation très simple et facile d'utilisation.
Erika Anseeuw
Reviewed in Canada on December 13, 2024
I bought this combo to turn my trailer into a temporary meat locker for a bull we butchered and had to hang to age for 2 weeks.I have several Inkbird products. They work very well. Good value. Plug and play.
I’m here
Reviewed in Canada on April 19, 2024
I purchased these for two reasons. We have a chicken brooder and the thermometer and heating side keeps the brooder at a constant temperature. The humidistat will be used in my sausages drying chamber as well as the temperature controller
Brian Nichols
Reviewed in Canada on April 3, 2023
Bought Inkbird temperature/humidity controllers on spec to cure tobacco (requires temperature and humidity control)--lost the crop while drying, irrelevant since never got around to using the devices.Temperature controller used instead to maintain soil temperature in a 16 foot by 4 foot by 4 foot hoop tunnel to over winter artichokes in Zone 6a.InkBird Temperature controller enclosed in a plastic bag resting on soil operating a 1000 watt soil heating cable buried 2"-3" below the surface, and 120V 9 watt LED pilot light on a blue 30 foot extension cord (see photo) via a conventional 6 outlet power strip enclosed in the same plastic bag.Power was supplied to the power strip via a wall mounted 15 Amp GFCI plug protected by a regulation weatherproof enclosure.6 months later still operating flawlessly. 2 layers of quilted tarps were used to cover the tunnel during an unprecedented one night dip to -26C just in case.Stars removed for accuracy simply to warn the user that I haven't had a chance to calibrate it--up to the user--but more or less consistent with independent but unscientific temperature monitoringPhoto shows 2 plastic bags containing (on the left) a Thermoworks Smoke X4 temperature monitor monitoring and broadcasting ambient and soil temperatures inside and outside the hoop tunnel, and (on the right) a bag containing the 2 power junctions (strips) and the Inkbird Temperature controller.The Inkbird temperature probe was inserted into the soil 2" (approx) from the heating cable and programmed to operate at 12 degrees C +/- 2 degrees C.While effort was made to prevent precipitation arising from soil moisture warmed by the cable rising and condensing on the roof of the tunnel, the plastic bags were not sealed.
Durka
Reviewed in the United States on December 15, 2022
There are definitely some expensive systems out thereb and they might be worth it as well, but this setup is really well priced and does a great job. I have a small microgreens setup and was struggling to keep the climate optimal until I got this. Now I don't really think about it and it just works.One thing that would be nice would be some connectivity for the alarms. If the temp goes way to high or low, for example, it'd be nice to get a notification. As it is, that rarely happens unless I leave a door open, but it'd be a nice feature. This setup does have configurable alarms that are audible, but mine is away from where I can hear it normally.
Joseph
Reviewed in Canada on July 23, 2021
I purchased 2 each of each of these (humidity and temp) 14 months ago and all 4 have been in use since then, I have never had any issues with them, they work great. I just bought 1 more of each for my son to use and I recommend the Inkbird to anyone who is setting up a grow room. If these ever give out, I will without hesitation buy them again. They are built WAY better than the light that I paid $600.00 for on here and lasted 4 months. Two thumbs up
Samwise
Reviewed in Canada on June 10, 2021
Temperature controller is very nice, can keep highs and lows, differentials, etc.Humidity probe is also very nice. Helps keep the indoor garden at a stable temperature and humidity. It will even keep at you until you acknowledge the alarms.Nice product, would recommend for gardens, smoking meats and cheeses, pretty much anything that you need a constant and stable environment.
Brad
Reviewed in Canada on June 24, 2020
Very easy to understand while youre going through the instructions, set your desired temp or RH then the high and low points you want it to turn on either heating/cooling or humidifier/dehumidifier and then your alarm settings, again, for both high and lows should your devices not be able to regulate it fast enough. I use these for a 4 × 4 × 6 grow tent and they work AWESOME for keeping everything in check. Has really helped reduce the frequency of me checking on my plants
Mr Big
Reviewed in Canada on November 28, 2019
The absolute best in the business. Be it caring for reptiles, fish and other animals, growing great cannabis, brewing awesome beer, cultivating edible mushrooms and plants or just controlling an environment. These controllers are great little tools to help you dial in your environmental variables with ease, I would highly recommend INKBIRD controllers to anyone looking for this sort of thing. 5 stars all the way, great gear.
ABC
Reviewed in the United States on January 7, 2019
I am using this to control an incubator and the only real problem I have is that it minimum temperature drop below the setpoint before the heater turns on is either 1 degree C or 2 degrees F (depending on which temperature scale is being used). As a result, the heater comes on for 5 minutes every half hour and gets so hot before it turns off that the temperature overshoots 2 degrees F for a total temperature swing of over 4 degrees F.It is also annoying that the setpoint temperature only shows integral degrees. The setpoint can be set with a resolution of tenths of a degree but to do it you have to set the setpoint to the nearest integral degree and then set the calibration (which does have a resolution of tenths of degrees) to adjust the effective setpoint.FWIW, the minimum humidity change required to turn the humidifier on is 5% relative humidity.
James Szabo
Reviewed in the United States on June 28, 2018
Perfect!
Customer
Reviewed in the United States on December 26, 2018
Good as usual.
Recommended Products
$406.14
$ 71 .28 $71.28