Shopping Cart

Your cart is empty.

Your cart is empty.

Ionizing Air Gun 10KV Antistatic Air Gun Anti Static Ionizer + High Voltage Generator for Industrial Electrostatic Elimination (110V)

Free shipping on orders over $29.99

$224.76

$ 71 .28 $71.28

In Stock
  • 【Upgraded H-V Generator】Output voltage:10KV. Power:70W. Static elimination is more efficient and stable. The electrostatic removal effect of 10KV ion generator is about twice that of 4.6KV. The ion wind blown is relatively concentrated, suitable for point-to-point static elimination.
  • 【Special grade material】Using tungsten steel ion needle, long-term resistance to ionization corrosion. The double ion needle makes the density of positive and negative charges generated greater. Eliminate static electricity more effectively.
  • 【Note】The Ionizing Air Gun needs to be used with your air compressor, the diameter of the air inlet is 8mm. Requirements for the air compressor: The pressure is between 43.5-101.5PSI (0.3-0.7mpa), the gas output is greater than 40L/min. (General household type can meet).
  • 【Comfortable and convenient】The switch design accords with ergonomics, more comfortable to press. The noise is only 68dB/A when input air pressure is 0.7Mpa. With grounding terminal and fuse to ensure the safety of machines and operators.
  • 【Application】Suitable for the elimination of static electricity in a variety of situations. Widely used in electronic assembly, printing, coating equipment, automatic conveying equipment, plastic metal shell dust-free spraying line and other industries.


Description
This Ionizing Air Gun adopts 10KV ion generator, and its electrostatic removal capacity is twice that of the traditional 4.6KV ion generator.
Antistatic air gun is suitable for local electrostatic elimination, as well as the removal of dust caused by static electricity. Not suitable for removal of stubborn dust.
Principle
The ion generating device generates a large amount of positive and negative ions.
It distributes both negatively & positively charged electrons via an air blast to a work are, resulting in less or no static buildup in the work area.
While eliminating static electricity, high-speed airflow can also remove dust attracted by static electricity.
Product Parameters

High Voltage Generator
Output voltage: 10KV
Input voltage: 110V Ac/60Hz
Power: 70W
Output ports: 2
Load: Maximum load 2 guns to remove static electricity
Consumption current: ≤4.5mA
Size: 190*160*90mm
Weight: 2.8KG
Air Gun
Operating voltage: 10 KV
Ion balance: 0±10V
Material of ion needle: Tungsten steel
Number of ion needles: 2
Air output:5.3CFM@1.0Mpa
Air velocity: 32M/Sec [pressure: 0.7Mpa]
Working pressure: Recommended 56PSI-113PSI
High voltage cable length: 2.8m
Operating environment: Dust-free/ordinary workshop, temperature 0-50°C, humidityOzone content: Dimension weight: 0.35KG
Notes

1.This product needs to be used with your air compressor or air pump. Air pressure of 56PSI-113PSI is recommended. 8mm outer diameter trachea should be used.
2.The 10KV generator can be connected to two air guns at the same time, and this machine only comes with one air gun. If you need a second air gun, please buy it separately.
Product Includes
10KV Generator*1
Air Gun*1
8mm Trachea*1
Power Line*1


Tyler H.
Reviewed in the United States on October 8, 2024
I run production jobs with acrylic and assemble in the same shop. Up until now, it's been a pain to keep static and random debris off my products during assembly/shipping. This Ionizer totally neutralizes any static and has made my production so much easier. AND I can neutralize myself from static too!I don't know if there's a lifetime limit on the electrode itself but this product is cheap enough to consider it a consumable at the end of the year.
Dr. Robert
Reviewed in the United States on October 26, 2024
Purchased six of these, had a quality issue with one of them and the company took care of it quickly.
Imagine86
Reviewed in the United States on July 20, 2023
I bought to help with my painting process. To add another step of prep to help the paint application for my automobiles. Does exactly what I needed. Was able to remove all parts of static that were causing me issues. Only problem is the wire is a bit short and the light to let you know that it’s ON is on the back of the machine. Will update after 3 months for better review.
John C.
Reviewed in the United States on July 19, 2023
We clean and assemble precision optics for medical, military and industrial applications. This anti-static gun is relatively inexpensive and easy to use. We have used for about 1 month. So far so good.
Rafa
Reviewed in the United States on November 4, 2022
La maquina llegó defectuosa y la compañía vendedora de inmediato se puso en contacto y reemplazo la máquina por una nueva sin costo adicional y el envío llego rápido,son muy responsables y eso es lo que cuenta.