Your cart is empty.
Your cart is empty.SPECIFICATIONS: Rivet Capacity:1/4" Overall Length:10-7/8"(280mm) Net Weight：3-1/2lbs.(1.6kg) Stroke:16mm Pulling Pressure：2423lbs. Air Inlet Thread NPT:1/4" Avg.Air Consumption:2.32 Liter/Stroke Air Pressure:90-120psi
Eric Canon
Reviewed in the United States on March 28, 2025
I had one that lasted years and years. Finally it failed, so I bought this one. (Actually I bought another from Amazon before this and it failed, too.) I paid a little more for this one to be sure it would serve me well. Less than a year later it is junk. This is not a tool I use every day - more like once a month, so the issue isn't wear. The issue is design. It jams. Where the air vents sticks open, so it blows and blows but won't release. Don't buy this one.
Richard Falasconi
Reviewed in Canada on September 24, 2024
I love this tool
Melissa
Reviewed in Canada on August 29, 2024
Broke first use with no return option
3RiversAftermarket
Reviewed in the United States on August 15, 2024
The rivet pins are not ejecting very well, but it does work. If you are doing something that requires high production, you might want to try a more expensive unit.
augustin leung
Reviewed in the United States on August 1, 2024
I’ve put about 100 1/4 stainless rivets through it so far. Sometimes you need a second trigger squeeze to get it to cut.
James H.
Reviewed in the United States on July 11, 2024
Great pneumatic riveter for the price. I read a lot of reviews online about pneumatic riveters and found this one on Amazon. A reviewer found that it is the same unit as the Astro PR14. Even the part numbers are the same, but it is $20 cheaper and does not have Astro engraved on the handle. I received it today and it comes with all the same tools as the Astro. Five rivet size tips, an extra set of jaws and an 1/4 air adaptor are included. No instructions but it did include the parts diagram and list. I printed the Astro PR14 instructions off the Astro site and followed those for set up. Adjusted, oiled and changed tips for 3/16 rivets (comes set up for 1/4"). Turn my compressor up to 125 psi and started riveting. Worked prefect! If you are not commercially manufacturing and just want a good garage tool, I do recommend this tool. It sure has saved my old wrists from a lot of pain squeezing those old hand rivet tools.
tony
Reviewed in Canada on November 9, 2024
Every 3 rivets it would break the piece as it pulled in so you have to take it apart and clean out. This product is a waste of time and money.
Customer
Reviewed in the United States on April 29, 2024
I only use rivets occasionally so I had a hard time justifying an air powered tool for it. I have used the same hand powered tool for 20 years. For the price of this tool I had quality concerns so I tested it on the largest steel rivet it can handle and it performed great. I also completed a project with it requiring 10 rivets and did not have any issues. My hands and wrists are angry that I didn’t buy it sooner.
plamen nenov
Reviewed in Canada on July 16, 2023
i have seen such kind of tools in Bombardier factory - that one is not a match to them, but if you pay attention where the tail of the rivet will fall (the rivet tails do not go in the cap unless you up the tool ) and if you are not very picky regarding the tension, then you will like this tool
Sugarkryptonite
Reviewed in Canada on October 11, 2023
Great tool. Got fed up of cranking by hand for all the rivets I needed to do. This works wonders.If you’re looking at the more expensive Astro (so did I), don’t bother. This is the EXACT same just without the name. Same colors and all.
Recommended Products
