Your cart is empty.
Your cart is empty.Product Description
Sportneer Bike Repair Stand 360° Rotatable Grip & Adjustable Height - Comfort !
Meet all Your Bicycle Repair and Use Needs
Chris
Reviewed in Australia on January 18, 2025
I have an XL eMTB and this stand holds it no problem well off the ground with the battery removed. Without the battery my bike is still about 20kg/44lbs.I think it'd be fine with extra 3kg battery but I would probably lower the height to get the front wheel on the ground for stability if I had to do any work that required the battery to be inserted. Although, I can't think of a scenario where I might need to have the battery inserted to service it.The clamp can hold the bike on the seat post vertically or on the top frame tube. I prefer the top tube because I don't want to put stress on my dropper post. The rotational adjustment in the clamp allows me the balance the bike well.This is great value for your DIY servicing jobs; it is not a professional stand and I wouldn't be holding or storing a bike on it for days on end.
Geoff P
Reviewed in Canada on September 30, 2024
The stand seems good to me, for the price I didn't expect it to look so sturdy. After using for a couple of weeks the only issue I see is that it can be a bit unstable when clamping to the seatpost ( could tip if leg not weighted on the floor if knocked ) but it's ok on the top tube.
Ervin
Reviewed in Canada on July 14, 2024
I have had this for about a year now and I can honestly say it does the job well.I use it all the time to clean and quick tune ups.It is stable and light.
Customer
Reviewed in Canada on July 1, 2024
Nice unit but can’t seem to get bike to rotate when on stand . So not bad but a struggle to get into different positions while on stand.
Marcello
Reviewed in Canada on November 3, 2024
Sturdy! Hold up, with no wobble that I noticed, east to set up and store away. Got it on sale so I’m super happy about that. If you need a bike stand and don’t want to go broke this is a great choice.
Third M.
Reviewed in Canada on November 19, 2024
This stand is a pleasant surprise: well-packaged, easily assembled, fairly light, and good stability. I use it to clean and tune my two carbon-frame road bikes, so it's necessary to clamp the seatpost (and only the seatpost). Depending on the length of your bike you may have to tilt the bike's front end down a bit to keep the stand from toppling. Not a problem for me, as this makes it somewhat easier to use the bike's controls while tuning. Some folks, me included, would like to have better access to the tool tray, as it's mounted out the back and is not easily reached while working. Otherwise, the stand offers plenty of movements, folds up pretty nicely, and is light enough for most people to move about easily. Great product.
Hugh Mann
Reviewed in Canada on November 15, 2024
I use it to work on my mountain bike & my city commuter bike. Very stable and easy to store with the legs folded.
Glen
Reviewed in Canada on October 26, 2024
Delivered in two days in a well packaged carton. Super easy to assemble with clear instructions. I was blown away with the quality of the stand. Once assembled I hung up my50 lb. E-bike. The stand is much more stable than I had expected. I centered my front disc in minutes ,something that I had attempted to do without the stand with great difficulty. I was able to set it up on my hardwood floors with out a pad underneath it because of the rubberized feet. For the money I don’t think you could improve on this product.
Mark Stacey
Reviewed in Canada on March 22, 2023
I got this primarily to wash my commuter bike of all the salt/slush from winter commuting, I can't really do any repairs on my bikes but that's a long term goal. So, a high end Park Tools type rig was pointless for me and I don't have that kind of cash anyway.This was really easy to put together, as most parts were already built. Just the head needed putting on, the tool shelf is removable and just needs putting together so you can put it on the stand if you need it.The head is easy to work with and offers a ton of positions and the ability to use on either the top tube for a hardtail or the seat post for full suspension. It grips well, can be easily tightened or loosened for different diameter parts of the bike, and angled depending on where the tipping point is.The head is easy to adjust once the bike is in, to get things level and centered.Quick release bolts are easy to use and to adjust.I find that sometimes I've not tightened one of those QRs properly, or the balance of the bike in't optimal but I can change that easily, especially if I'm working on the slight slope of my drive way outside the garage when it's sunny.A really good product for the price tag especially if you're starting out with repairs or don't need anything pro level. I would buy this again or recommend it to anyone.
Mukesh Rao
Reviewed in India on November 11, 2022
I use it to clean and service my Emotorad EMX (Electric city bicycle) which is approximately 25 kg. To avoid the stand falling over due to cycle weight, I use the cycle lock to bind the stand to the pillar of my garage This adds to stability of the stand. I find this stand useful as it allows me to access different parts of the cycle without need to bend over in awkward ways.
Sukanta Biswas
Reviewed in India on October 24, 2022
Pros1. Price - Does not burn a hole through your pocket like the other premium brands like park tool.2. Product as advertised3. Quality of material and craftmanship- good for the price (need to see how it holds up with respect to wear and tear with day-to-day usage.4. Features- excellent manueverality with all degrees of freedom. Nice tool post. Stable stand.ConsNothing as of yet
Cliente de
Reviewed in Mexico on May 19, 2021
lo mismo que ya escribí
CMan
Reviewed in the United States on September 19, 2019
Listen, I was about to drop $200 on a bike stand and then I read the raving reviews about this one. It took me less than 15 minutes to assemble, it's made of extremely sturdy, quality materials, it's light and easy to move... and I can assure you that you will NOT find a more quality bike stand for this price... or for that matter, any price. I'm sure mechanics have top of the line bike stands, etc... but if you're a cyclist, beginner or long timer, and you want an awesome, ridiculously affordable bike stand, this is it.My one and only complaint... and what took me longer to install than everything else... is the tool tray. The directions, which are great and easy to follow for everything else, are lacking for the tool tray... but once I looked at how it went together, it made perfect sense and is very useful.Also, the packaging was excellent. It comes with the Allen wrenches you need and of course, the screws... but there are only 3 screws (all for the tool tray). Other than that, everything was pretty much already assembled.... I simply needed to make a couple connections, tighten up the lock down clamps and attach the wheel stabilizer, which, again, took all of 15 minutes.I don't write reviews unless I feel very strongly about something. I feel very strongly in this rack and I highly encourage you save $200 and purchase this instead. You will NOT be disappointed.Oh my gosh, no loner having to break my back bending over... or having someone help me to switch gears, etc... this stand is a God send... and no, I don't own stock or work for this company. I read reviews before I buy anything and trust me, this is a GREAT product! You will NOT regret your purchase. God bless and enjoy a clean bike!!!
Recommended Products
$49.20
$ 23 .03 $23.03