Your cart is empty.
Your cart is empty.
✍Specifications:
Input Voltage: DC12V, DC24V(Optional)
Temperature Measurement Range: - 50℃~110 ℃
Resolution Ratio: -9.9℃-99.9℃--0.1℃, other temperature intervals:1℃
Measurement Precision: 0.1℃
Control Precision: 0.1℃
Return Difference Precision: 0.1℃
Refresh Rate: 0.5S
High-temperature Protection: 0~110℃
Measurement Input: NTC (10K 0. 5%) waterproof sensor
Output: 20A Relay
Environmental Requirements:
Temperature Requirement: -10 ℃~60 ℃
Humidity Requirement: 20%~85%
Size: 4.8 x 2.8cm / 1.89 x 1.10in
Static current: ≤ 35MA
Pickup current: ≤ 65MA
✍Methods of Use:
After Connecting to the power supply and load (referring to the wiring diagram), you can supply power for the controller, the color red manifest for measuring temperature, the following color blue (or red) as required to set the temperature
In the case of manifesting real temperature and please press the button set, the following setting text digital will flash and temperature, after completing the setting, please wait for 3 it will return automatically, at this time controller will automatically disconnect Relay according to the preset temperature, the this senor can meet all kinds of large power load, please make sure the line is correct
The Description of Light and Digital Tube Status:
Light: The off means Relay is disconnected, and the normal light on shows that the Relay has closed.
Digital tube: The sign LLL is the open circuit of sensor and the sign means beyond the measuring range, the controller will forcibly disconnect Relay, the sign --- means high- temperature protection
✍Package Includes:
1 x Temperature Controller with probe
Noelle
Reviewed in Canada on January 4, 2024
These are not water proof, the back side has the electronics wide open. Could not use them for the application I intended them for.
Erin MacDonald
Reviewed in Canada on December 23, 2023
I have not yet use this, the item arrived quick and look as good quality. I will update the review when I get around to using it
John
Reviewed in Canada on November 3, 2023
I bought this to use to run a fan to keep my solar controller bay in the RV cool. It works great. I attached a fan to the "load" side and purchased a dedicated on/off switch. I programmed it so that the fan would turn on in the solar controller bay when the temperature reached 33C. Works great! There are 2 setups for attaching a load. One looked simpler than the other, but wouldn't work for me. I had to use the first setup.
Valadas
Reviewed in Canada on October 5, 2023
This unit works great, is precise and easy to use. Now if you need to adjust advanced settings, you probably need to re-read the instructions a couple of times. but once you understand, it becomes second nature.Had no issues driving a 120W 12V heater with it so it does appear to support 10A correctly. The output is a dry contact only, so make sure you check the wiring diagram if your load is not working.
Customer
Reviewed in Canada on September 24, 2022
Does its job perfectly.
René Dubé
Reviewed in Canada on May 13, 2022
Fonction bien :)
Recommended Products
$14.12
$ 6 .47 $6.47