Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell #25 Roller Chain Idler Sprocket, 8mm Bore 1/4' Pitch 19 Tooth Sprocket Tensioner, C45 Carbon Steel 25 Roller Chain Sprocket with Bearing for ISO 04C Chain, 2Pcs

5.0 Write Review
Free shipping on orders over CA $49.99

CA $31.99

CA $ 15 .99 CA $15.99

In Stock
  • Specifications: Number of Teeth: 19; Outside Diameter: 42mm / 1.65-inch; Bump Width: 6mm / 0.24-inch; Total Width: 15mm / 0.59-inch; Bore Diameter: 8mm / 0.31-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 3mm / 0.12-inch; 2 x Idler Sprocket
  • Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
  • The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
  • The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
  • Widely used in milling machine, drilling machine or other machinery transmission occasions.


Features:
1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.


Recommended Products
JT Sprockets JTR1225.36 36 Tooth Steel Rear Sprocket

CA $38.62

CA $ 17 .99 CA $17.99

4.5
Select Option
RHKING #35 Roller Chain Sprocket Rust Prevention Hardened with Set Screws 1'Bore 16Tooth

CA $19.69

CA $ 8 .99 CA $8.99

4.9
Select Option
uxcell #50 Chain Roller Sprocket B Type, 1-1/8' Bore 15 Tooth Single Strand Chain Sprocket, Carbon Steel, Keyway with Set Screws

CA $38.11

CA $ 17 .99 CA $17.99

5.0
Select Option
2pcs 3/8' Chainsaw Sprocket Spline Aperture 9mm Integrated Guide Gear Chainsaw Electric Replacement Parts Compatible with Makita DUC254 DUC204

CA $13.39

CA $ 7 .99 CA $7.99

4.9
Select Option
uxcell #50 Chain Roller Sprocket B Type, 7/8' Bore 15 Tooth Single Strand Chain Sprocket, Carbon Steel, Keyway with Set Screws

CA $39.99

CA $ 16 .99 CA $16.99

5.0
Select Option
Steel Go Kart Sprocket Hub for 3/4' Bore & 3/16' Keyway Hardware Kit with 420 Chain 50T Rear Drive Sprocket 4 Hole for Go Cart Mini Bike Silver Parts

CA $84.00

CA $ 37 .99 CA $37.99

4.8
Select Option
RHKING #40 Roller Chain Sprocket Rust Prevention Hardened with Set Screws 5/8'Bore 12 Tooth

CA $20.99

CA $ 10 .99 CA $10.99

4.7
Select Option
Jeremywell 35B16T-5/8' Bore 16 Tooth Jackshaft Sprocket for 35 Roller Chain

CA $46.23

CA $ 20 .99 CA $20.99

4.3
Select Option