Your cart is empty.
Your cart is empty.Motherboard Compatibility:M-ATX/ITX Product Size:247×160×327mm Hard Disk Compartment: HDD×1 and SSD×2 (common position with fan position can not be installed at the same time) Expansion Slot: 4XPCI card slot Front Ports: USB3.0x1 and Type-Cx1 Fans/Water Cooling. 2 x 120mm fans on top panel 1 x 90mm fan on rear panel Bottom 2×120mm fans (co-located with HDD, cannot be installed at the same time) Power supply length limit: 150mm Graphics card length:320mm CPU cooler height limit:138mm
yunsoo kim
Reviewed in Canada on March 27, 2025
Awesome for its price! It arrived in one day, and the quality was extremely good. There were no dents, cracks, or smudges. The small form factor made it perfect for my micro ATX motherboard and ATX power supply. I wish the pannels would be a little thicker and include zip ties for cable management, but its a 70 dollar case after all. Very worth it.
Ramon
Reviewed in Canada on January 15, 2025
Overall it was a fun challenge to manage cables and get everything organized but I have a few issues.There was no hardware to mount the feet, the rear pcie bracket cover was missing, and there were no instructions so figuring out how to attach the handle while mounting fans to the top as well as add the magnetic mesh was a problem solving game.
Zachary s.
Reviewed in the United States on January 13, 2025
Missing screws for the legs
Attique Ahmed Hussain
Reviewed in the United Kingdom on April 3, 2025
Complete rubbish. Screws that come with the case barely work and if they do they'll break off after first contact! Leaving you unable to dismantle the case further. Will be returning 100% as case is completely unusable. Nothing is measured according to fit and the case comes with no screw holes for fans / drives or anything important. Do NOT BUY.
David
Reviewed in the United States on April 11, 2025
A no frills case but it worksIf you can find a 80mm LED Fan for the case it looks really nice and can show off the glass side panel
LONE WOLF J674
Reviewed in the United States on April 10, 2025
OofIma say this case is awesomeBut you have to put everything together yourselfGet a shorter graphics card it says it can support over 300mm but they dont include room for your psu cablesI have a smaller than average psu and no room for wiresWas missing some parts but they got back to me asapDO NOT USE normal pc fans go low pro and make sure to mount them all the way up from the moboSpeaking of mobo dont use a micro atx as all my lower pins are covered and even with small fans i still cant really use themSo an itx would be better fresh buildOther than yhat figure it out lolIm going to get a lowpro gpu as the 1080 im using from an old build is just way to bigAll in all not a bad mini case for the priceBe prepared though as this is not for starters
tyler
Reviewed in the United States on April 1, 2025
Update! MATX MOBO, i was unable to use the bottom pcie slot without modification. Theres a rivet in the case that gets in the way of the metal bracket for an expansion card, forcing it to twist. I had shortten the brackect to avoid the rivet. The rivet could have easily been installed just a little further down to clear any card.*I like the case but I'm not sure it's quite worth full price even though it's already cheap*Overall, it was as expected. Not bad just be aware of what you're getting. Only real issues I had were the magnetic filter things have the magnets very poorly attached, peeling up out of the box. And the mounting of the PSU, the cable extension that's provided works fine, but it pinches the cable and is difficult to force the PSU/bracket into position, along with the power switch not having an actual opening to flip on and off.Also, no hardware for the motherboard/fans/gpu supportIt's a very cheap case, it's what I expected, luckily I was transferring from another case so I was able to reuse some parts
Recommended Products
