Your cart is empty.
Your cart is empty.Product Description
WADEO Digital Thermostat Kit Replacement Part for Traeger Wood Pellet Grills
Features:
Replacement For All Traeger wood pellet grill models (except PTG).
Good quality: High quality PCBA & High quality aluminum knob for switching models and adjusting temperature.
Easy installation: Plug-in connectors & Plug and play.
Eight cooking Temperature settings: from 180 -375F.
Clear and bright LCD Display shows exact cooking temperature.
Equipped with safety device and automatic cooling function to ensure safety.
Installation Instructions
- Unscrew the old panel. Unscrew the bottom screws of the hopper( front and back). Cut all the ties binding the wires. Unplug all the wires. Remove the old panels.
- Feed the RTD wires through the holes on the left side of the grill into the bottom of the hopper and into the hole where the panel is supposed to be attached and screw RTD wires to the green terminal block.
- Install the RTD (Temperature Sensor ROD) located inside of the grill.
- Plug all the wires into it proper cable connections.
- Use zip ties tie to bundle loose cords.
- Screw on the bottom grate.
- Screw and tighten the new digital control.
WADEO Thermostat Controller Board for Traeger Wood Pellet Grills
- 8 Temperature Settings: Adjustable temperature from 180F to 375F.
- 3 Different Modes: Smoke mode, Temperature mode, Hight mode.
- Clear LCD Display: Shows exact cooking temperature inside your Grill.
Package Includes
- 1x Thermostat Controller Board
- 1x Temperature Probe
- 1x Hot Rod Ignitor
- 1x Fuse
- 5x Fixing Bands
Customer
Reviewed in Canada on July 9, 2024
I really like the fact that it’s just in plug the old one and plug in the new one. Took 15 minutes to change.
Trisha
Reviewed in Canada on June 22, 2024
Stopped working after 2nd use
Jon O.
Reviewed in Canada on October 15, 2024
Replaced an older three position swith with this. Easy to install and works great.
Customer
Reviewed in Canada on October 12, 2024
Put it on my Smoker machine and work perfect
Customer
Reviewed in Canada on January 21, 2024
It was easy to install and worked pretty good from the start but was a little sluggish keeping up with the temperature setting. Decided to check the P setting and found it to be 5. Factory setting is 2 so I reset it to 2 and it's working fine. Pretty good value for the price especially considering the oem price.
Customer
Reviewed in Canada on June 9, 2023
Was extremely easy to install as the wires are colour coded exactly the same as the original controller. The only issue I have is the temp fluctuates way more than the original due to when the auger kicks back in when the temp drops. Original controller would kick in when it dropped 1 degree below setting and this one is about 4-5 degrees. If it wasn't for that one slight flaw I would have given this 5 stars.
Dane
Reviewed in Canada on June 8, 2023
Installed the controller, everything turned on but wouldn’t control the temperature. The auger kept feeding and temperature rose to over 450 when set at 350.No quality control, don’t waste your time or money.
Recommended Products
$20.49
$ 10 .07 $10.07
$35.06
$ 17 .27 $17.27
$11.15
$ 5 .75 $5.75