Your cart is empty.
Your cart is empty.
This Viton O-ring is black in color, round in shape, has a durometer (hardness) of 75A, and is designed for use in a wide variety of sealing applications.
Viton has excellent heat, fuel, and chemical resistance. Viton is acceptable for temperature applications between -15 degrees F (-26 degrees C) to 400 degrees F (205 degrees C). It is compatible for use with non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone, and weathering. Viton is vulnerable to low molecular organic acids, ammonia gas, alkalis, amines, glycol-based brake fluids, and super-heated steam.
This Viton O-ring has a shore durometer of 75A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.
O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in various sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.
This Viton O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.
Rich
Reviewed in the United States on January 4, 2024
For ur Umnumzaan- perfect fit size 6, as others have said. Seems to be the really durable ones.
Jeff Decker
Reviewed in the United States on September 13, 2023
These are decent O rings and lasted a while for what I needed them for.
M Auger
Reviewed in Canada on July 20, 2021
Didn't really need 100 , 10 would have been a more convenient quantity but price was reasonable.
Teresa
Reviewed in Canada on February 1, 2021
100 was more than I needed but just as inexpensive as going out and buying the 6 that I needed.
E
Reviewed in the United States on November 18, 2020
Works perfectly as an inexpensive replacement for the thumb stud dampener o rings on the Chris Reeve Knives Umnumzaan.
Customer
Reviewed in Canada on December 22, 2019
use this product for small engine repair
A9
Reviewed in the United States on July 24, 2017
006 are the perfect size for the Chris Reeve Umnumzaan. They also make opening nearly silent. Great upgrade!Specifically, the 006 Viton O-Ring, 75A Durometer, Black, 1/8" ID, 1/4" OD, 1/16" Width are exact fits.
Michel
Reviewed in Canada on November 19, 2017
As described does the job it was intended for
Customer
Reviewed in Canada on March 27, 2016
Great product and service !!!!
Jake Flash
Reviewed in the United States on September 7, 2014
If you're looking for replacement o-rings for the CRK Umnumzaan knife, these fit perfectly and function much better than the OEM o-rings. I've gone through a few sets of the original factory o-rings (they provided replacements free of charge). However, as those OEM o-rings degraded/melted for the third time in normal use, I finally took the plunge to buy these. They are far more durable and with 50 sets of 2, you'll have enough o-rings to last a long time.
Recommended Products
CA $20.73
CA $ 10 .99 CA $10.99
CA $9.89
CA $ 4 .99 CA $4.99
CA $10.44
CA $ 4 .99 CA $4.99
CA $9.26
CA $ 4 .99 CA $4.99
CA $8.88
CA $ 3 .99 CA $3.99
CA $11.49
CA $ 5 .99 CA $5.99