Shopping Cart

Your cart is empty.

Your cart is empty.

17pcs Universal Roller Skid Snow Thrower Shoes Kit, Durable Snowblower Skid Shoes Snow Blower Skid Shoes with Wheels Easy to Use Practical Accessories

Free shipping on orders over CA $49.99

CA $29.99

CA $ 14 .99 CA $14.99

In Stock
  • Product Includes: You will receive 2 slots, 4 screws, 4 nuts, 2 wheels, 4 washers and 1 wrench, a total of 17 sets.
  • Quality Materials: The snow blower shoes are made of galvanized and nylon, reliable and sturdy, long-lasting and durable. Not easy to break or fade, you can use them with confidence.
  • Easy to Use: 1. Use an Allen-wrench to loosen the screws 2. Move the damaged or replaced wheel. 3. Reinstall the new wheel. 4. Tighten the screws with an Allen-wrench.
  • Practicality: The universal roller skid snow thrower shoes can effectively protect driveways, sidewalks, garages and porches from scratches, making the snow blower easier to operate and improving the operability of the snow blower.
  • Wide Applications: The universal roller skid snow thrower shoes are for 490-241-0038 Universal Snow Blower Rolling Anti-skid Shoes, cold-resistant, long service life, can be quickly repaired in 5 minutes, lowering time.


Specification:
Color: black, silver
Material: galvanized and nylon
Product Size: as shown in the picture
Package details:
17 x universal roller skid snow thrower shoes kit
Note:
Due to manual measurement, the size and weight may have a certain error.
Due to the difference between monitors, there may be a slight color difference.


ken thompson
Reviewed in Canada on February 23, 2025
Put lock tight on the bolts and they have been good for two seasons ! They work well. I can see eventually the wheels will wear down but so far so good !
Doug R.
Reviewed in Canada on February 17, 2025
Don’t waste your money the wheels come off and jam up the auger and burn the belt
maltonmanor
Reviewed in Canada on February 17, 2025
There was no mention on the listing as to how far apart the two bolts are. I can confirm that they are 3" from each hole center. So they did not quite fit my Husqavarna Snow Blower. With a foot of snow on my driveway, I did not have the luxury of time to order a different type, so I milled these with my drill press and filed off about 1/64th of an inch on both slots and managed to get this to installed. I had to remove the wheels to install as the nuts are now very close to the wheels.The wheels are a huge improvement over the typical sledge style. I did 5 driveways with no hassles. The wheels move freely and all seems robust and well designed.
Recommended Products

CA $43.32

CA $ 22 .99 CA $22.99

5.0
Select Option

CA $16.98

CA $ 7 .99 CA $7.99

4.6
Select Option

CA $15.98

CA $ 7 .99 CA $7.99

4.6
Select Option

CA $38.99

CA $ 18 .99 CA $18.99

5.0
Select Option