Specification:
Material: Food-grade ABS
Size: approx.240*240*350mm / 9.45*9.45*13.78in
Package weight: 2.26kg
Capacity: 3.2 gallon(12L)
Working pressure: 50Mpsi
Interface size: 2 points valve
Gas storage pressure: 7psi
Usage:
1. Remove the water inlet cap, slowly screw the pressure tank ball valve into the upper water inlet, hand tighten, insert 1/4 PE pipe and insert it into the end.
2. Check if there is any leakage after turning on. If it is found, adjust the pressure barrel ball valve in time, if necessary, wrap the PTFE TAPE at the water inlet.
3. In order to the pressure tank liner and the RO machine, after the first barrel of water is filled, please open the pure water in the barrel and drain the second barrel for drinking.
4. During normal use, the water should be drained once a month, and once every time the filteris replaced, it should be drained once to achieve the purpose of cleaning the liner, filterand pipeline.
Package List:
1* Pressurized Water Storage Tank
1* Valve
Note:
1. This product uses plastic thread. Please install the ball valve correctly to avoid twisting and screwing. Do not tighten too hard.
2. If the user leaves home for a long time, please close the inlet valve and cut off the power supply.
3. When installing, connect the pipeline correctly and confirm whether the high pressure switch can achieve full water shutdown.
4. Pressure tank working temperature 1-45℃
5. Avoid sun exposure to pressure bucket.
6. Please allow slight error due to manual measurement and make sure you do not mind before ordering.
