Your cart is empty.
Your cart is empty.Product Description
Features
1. Good Printing Effect: Strong surface adhesion, no glue required, allows for cold stamping, and printing does not have edges. The printed product has a matte effect on the bottom, which is exquisite and beautiful.
2. Print Temperature: When the temperature of the heating bed is about 60℃, there will be excellent adhesion, and you can directly print on each side of the double sided PEI board without using any glue or other tools to help the model adhere to the board. You don't need to worry about the print curling at a bed temperature of 60℃. It can also print PETG well, but the temperature of the hotbed needs to be around 80-85℃.
Remi
Reviewed in Canada on February 15, 2025
I have a Qidi X-Plus3, and this plate fits my build surface perfectly. It’s the correct size (280x280mm), and the handle isn’t included in this measurement (I was worried about that since the description didn’t specify). It’s also cheaper than the original Qidi plate and comes with a magnetic sheet - useless for Qidi but possibly helpful for another printer using this format.The only issue is that this plate is thinner than the original. It’s only a few tenths of a millimeter, but that’s the difference between a solid steel plate with high-quality PEI and a lower-grade alternative. You’ll also need to adjust the Z-offset when switching to this plate, and you won’t be able to swap it with the original one without recalibrating - your first layer would inevitably fail.Would I recommend it? Yes, if you want a spare plate. No, if you’re looking for the same quality as the original - though in that case, you’ll have to pay more.I especially wish the product description included technical details (size, exact thickness, etc.), as this is the main reason for my low rating - you don’t really know what you’re buying, and you assume it’s like the original when it’s not!In my opinion, this type of information is becoming increasingly rare on Amazon. Maybe I should have contacted the seller before leaving a lower rating, and I might still do so if I find the time.
MasterTacoChief
Reviewed in the United States on January 16, 2025
The texture is nice and really pops with glossy material. I also bought a 2mm 12x12 sheet of aluminum and cut it down to match the bed size and adhered the magnetic pad to that, which makes the total thickness the same as the original glass plate. Now I can use the original clips and easily swap out plate types.
zdravez
Reviewed in the United States on August 11, 2023
This is the most economical PEI surface, I could find, for my Ender 7. The build plate, I received, fits well and works within its specs as required. I have printed several PLA projects with no adhesion issues.
Recommended Products