Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools 0.00005''/0.001 mm 7-Key Electronic Digital Micrometer, IP54
Water Resistant, Dust Resistant, Locking Nut, Vernier Scale, Carbide-Tipped Anvil
- Large Display
- Auto On and Off capabilities
- Resolution: 0.001 mm / 0.00005 inches
- Absolute, floating zero, and relative measurements (you can zero out at any point)
- Location Memory (no need to re-zero with each use!)
- Hold button, Tolerance Mode, Relative and Absolute Modes, and Pre-settable Origin
- Instant inch/millimeter conversion. Switch between metric and imperial measurements with great ease
- Comes with a fitted case and 1 battery
- The battery used is button cell LR44 or SR44 (1.5V)
- Operating Temperature: 0°C to +40°C (32°F~104°F)
- Storage temperature: -20°C to +70°C (-4°F~158°F)
- Humidity influence: no influence within relative humidity ≤ 80%
- Prior to use, the origin value setting should be checked; otherwise, the wrong setting will be affect the measuring results.
- The thimble should not be turned out from the fixed pipe to prevent the components inside being jammed.
- The battery should be taken out if it is not used for a long time.
Coming with all must-have features of an outside micrometer
IP54, Water Proof, Dust Proof
IP54 rating is protected against quantity of dust that could interfere with the normal operation of the product(but is not fully dust tight). It is also protected against water or liquid splashing from any angles.
Carbide-Tipped Anvil
The carbide-tipped anvil provides much longer tool life that the ones not coming with the feature. It is the part always used to touching the face of the other objects. The enhanced feature enables longer life. All Accusize outside micrometers come with the carbide-tipped measuring face
Locking Nut
This feature is convenient for user to keep track of a measurement and also to lock the spindle for small lot gauging, easy to Operate
Vernier Scale
The Vernier type sleeve scale provides more accurate measurements than the mic without the feature. Vernier scales measure in .0001”. (The main index scale on the sleeve measures in increments of only .025”)
Accusize 7-Key Electronic Digital Outside Micrometer Features
Ratchet Speeder
This feature is essential for a production environment, for professional precision measuring. Always use the ratchet to tighten the spindle. Never tighten up by turning the barrel.
- Preventing over-tightening
- Applying a constant measuring force to the spindle
- Ensuring reliable measurements
7-Key Electronic Digital Outside Micrometer Features
Large LCD
- Resolution: 0.00005"/0.001mm.
- Location memory. (no need to re-zero with each use)
- Instant inch/mm conversion.
- Switch between metric and imperial measurements with great ease.
- Come with fitted cases.
- The battery used is button cell LR44 or SR44 (1.5V).
- Auto On and Off capabilities.
- Absolute, floating zero, and relative measurements, you can zero out at any point.
- Metric/Inch Conversion
- Data Output
- Relative/Absolute measuring
- Tolerance setting
- Positive setting
- Negative setting
- Origin resetting
Features of the production environment of the factory manufacturing the micrometers
LENGTH MEASUREMENT
Swiss TRIMOS, ABC-P500 High Precision Universal Measuring Length Machines.
- For setting, calibrating measuring instruments , gages
- and measuring inside and outside dimensions
- miniutely. Whole travels use absolutely measuring.
- Range0-550mm.
- Uncertainty of measurement
- ≤ 0.15+L/2000μm. LmmMillimeter.
- Repeat precision0.05μm.
Measuring Length Machine
German CARL ZEISS JENA Product 0-3000mm Measuring Length Machine.
- For precisely measuring inside and outside dimensions
- of length L ≤ 3000mm minutely.
- Uncertainty of outside dimension measurement: ≤ ±(1.2+3L/1000)μm.
- Uncertainty of inside dimension measurement: ≤ ±(1.5+3L/1000)μm. L: mm
PITCH MEASUREMENT
High precision small pitch measuring machine.
- Range: 0.3-1mm.
- Length: ≤140mm.
- Pitch diameter: ≤40mm.
- Uncertainty of measurement:
- (0.15+L/240)μm. L: mm(Millimeter).
ROUNDNESS MEASUREMENT
Roundness Measuring Machine.
- For minutely measuring roundness waviness concentricity perpendicularity parallelism and
- planeness.
- Spectrometric analyzing for surface state of parts.
- Labeling eccentricity and phase calibration of part.
- Range bore Ф3-Ф300mm.
- Cylindrical diameter: 0-Ф300mm.
- Uncertainty of measuring ≤0.03μm.
- The max weight of part 10kg.
Tim
Reviewed in the United States on February 26, 2025
Very nice micrometer. Not plastic.
Uncle Matt.
Reviewed in Canada on August 27, 2024
Seems like a decent product, we shall see, but everything Digital from accusize seems to come with a dead battery, so don't expect to get to use it right away.
S Gillen
Reviewed in the United States on August 25, 2024
very dissapointed that the battery was dead on a brand new set of micrometers i had to go out and purchase a new battery to make sure they even worked i would have given 5 stars if it werent for the battery issue costing me gas time and even more money im out of
LMR C
Reviewed in Canada on July 4, 2024
Ordered 3 of these they all showed up dead battery then the solder on the negative pole was flopping around very cheap
DB
Reviewed in Canada on July 23, 2023
Trying to figure out why it's Notchy. Moved the Spindle as far open as it goes. Bunch of metal shavings inside it. Disappointing, have bought a few Accusize micrometers in the past without issues. Quality seems to have dropped massively. Also the Spindle lock sticks/notchy
Patrick Stevens
Reviewed in the United States on March 31, 2023
Carbide end tip was not cut straight thereby causing up to a 4 to 5 thousandth of inch error.
Bradley
Reviewed in Canada on December 7, 2022
Very easy to use and read. I am very happy with this purchase.
J.Wallhausen
Reviewed in the United States on July 22, 2021
Great tool with more options 👌
JORGE ALFREDO PEREZ CASAS
Reviewed in Mexico on September 18, 2020
Excelente tiempo de entrega y el producto tiene excelente calidad
Goatboy 4570
Reviewed in Canada on August 15, 2020
My unit had dirt in the spindle and would stick and jam in and around the 2" mark, so i sent it back back. I would and may buy another as i think it's a good unit and good value for the money, i'm glad amazon takes returns and covers any quality control issues i may have.The calibration piece was bang on tho as i cross checked it with a caliper and mic i have so i knew 0 was 0. Out at 2.5" it compared within a couple ten thou of my old skool 2-3" vernier micrometer measuring on a chevy crank. I found it to be very touchy and required a very light touch or it would measure undersize, i never even used the ratchet at the end, just touch down and with a very light drag took my reading.I think with a little practice and a light touch this unit is very accurate.The plastic insulation piece on the C-frame is kinda chincy and a thicker piece would have made me more confident that the heat from my hand wasn't throwing off the readings.The readout was nice and easy to read. i thought it strange that at 2" i reads all zeros there is no 2 in the first digit (if you go just under 2 it reads a minus number not 1.9999 etc) and maybe i hadn't figured that out yet but it reads from 0.0000" at the calibration point. shows a 2 in the picture as advertised tho ?I Like that the thimble is all metal and not plastic like some other units out there.The battery was half dead but i didn't care about that its probably because of the auto power on feature being activated during transport. Fresh batt good to go!
S35VN
Reviewed in Canada on August 17, 2018
Very good price and quality. I have been using this tool for case base measurements in my reloading for about a year now. So far so good
John F. Rocheleau
Reviewed in Canada on February 3, 2018
Well made and precise. Right out of the box it was bang-on when tested on flat feeler gauges. Always a good idea to practice with a known constant like a feeler gauge, to get the feel for the right speed to turn the ratchet knob. Very pleased with this micrometer.
Alton Krantz
Reviewed in Canada on January 5, 2018
Works fine now. The battery came dead and after letting the supplier know they has refunded the cost of the new battery I had to purchase myself. Thanks for the great service.
Recommended Products