Your cart is empty.
Your cart is empty. Antline's Guarantee:
We take "the customer's satisfaction first" as our principle and offer "ONE YEAR" warranty on item(s) damaged during delivery or have a confirmed manufacturer defect.
Features
- LED Type: 33-pieces 2835 chipset
- Lumen: 1000LM/bulb
- Wide Operating Voltage: 12V-24V DC
- Current: 310MA
- Wattage: 3.7W/Bulb
- Length and Diameter: 1.63" x 0.83"
- Lifespan: 30,000 hours
Application: Tail lights, brake lights, parking lights, side marker lights, turn signal lights.
Cross Reference: 3047, 3056, 3057, 3057A, 3155, 3156, 3156K, 3157, 3157A, 3157K, 3157NA, 3356, 3357, 3357A, 3454NA, 3456, 3457, 3457A, 3457K, 3457NA, 3757A, 4057, 4114, 4156, 4157, 4157K, 4157NA, 5702A, 5702AK.
Safe & Extremely Bright Design: Non-polarity design for easy plug and play installation, Unique 360 degree lighting design to enhance brightness.
NOTICE: Please load resistor or flash relay to prevent the hyper flash, if you would replace it as turn signal light.
Nathan
Reviewed in Canada on February 23, 2025
They work as just brake lights but even then don't turn off immediately stay dimly lit for about 20 seconds .... completely don't workk or turn signals..will be replacing the 2 that I'm using with one that shut off idlmmediatly .
Customer
Reviewed in Canada on February 20, 2025
Very professional Baldwin that works good and it turns on and off and it looks pretty
WJK
Reviewed in the United States on February 18, 2025
Works great. Make sure you line the pins up with your socket direction (the leads are offset to one another and need to be properly installed) . Buy an aftermarket flasher meant to LEDS (about $10) so you dont need resistors which dim the bulb and waste power and can be a pain. My only gripe is my car needs 6 of these but you can only buy in packs of 4.
Glen Duke
Reviewed in Canada on July 30, 2024
Plug and play. bright lights
applicator
Reviewed in Canada on November 12, 2024
Installed and no issues yet other than fast flash. You should put in your website might need a load limiter for certain applications
Sarabjeet Singh
Reviewed in Canada on January 19, 2024
Works fine
IanMarshall
Reviewed in Canada on April 5, 2024
They won't replace regular bulbs, not enough resistance for the vehicle to recognize they're installed... the blinker still flicks very quickly like the bulb is burned out. I think this is a bad design on the cars side, not the bulb, but people should be aware that they aren't recognized properly.
Customer
Reviewed in Canada on September 3, 2023
VR
John Punter
Reviewed in Canada on August 26, 2023
Bright
Marie or Jay
Reviewed in the United States on August 1, 2019
I used these to replace backup bulbs on an 03 marauder and 08 lincoln Town Car. They call for a 3156 bulb. Also used the 1156 (same bulb/different base0 on a 98 Subaru reverse lights. When used like this all emitters light up. I was a bit concerned that would not be the case. No worries. I say these are a good value because they are bright and seem sturdy.I tried a couple of other , cheaper, 3156 type leds and these antline knocked them out of the park on brightness. I will just give those other cheap ones away.Other cheaper ones would probably be fine if you just want an LED replacement, long life and low power consumption, equivalent to an incandescent bulb in brightness. If you want more light you can buy these.I think they would be plenty bright for turn signals. If you use them on modern cars for turn signals you will likely need can-bus ready bulbs resistors depending on the particular car. More advanced folks could possibly reprogram or rewire the car. Do your research first.Older cars likely will require just a new plug in electronic flasher unit. If you do all your flashing bulbs you need the low amp flasher units not just the regular electronic units.Jay
Christopher
Reviewed in the United States on April 9, 2019
I ordered these last summer, and they were exactly as promised - easy to install in my truck in the reverse lamps and running lamps, and very bright.About 9 months in, I noticed that one of them had failed - no visible indication of what went wrong, but it just wouldn't light anymore. I contacted the seller (Tri-Sense) and they immediately sent me replacements - not just a single lamp, but an entire 4-pack in case any of the other lamps in the original set should fail later. They didn't even ask me to return the originals. So while a 9-month failure isn't good, I'm still giving these 5 stars as they overall work as expected and the company stands by replacements. Hopefully it was just a fluke!
Techie007
Reviewed in the United States on March 15, 2018
These red and yellow LEDs were a perfect upgrade for my 2008 Toyota Corolla's taillights and turn-signals! Even better, these bulbs appear to be a quality product at an excellent price: Four bulbs for the price that most sellers are selling two bulbs. They are approximately 50% brighter than the original bulbs, and the dual-filament feature works as intended with both colors. In my car, the bulbs worked the same regardless of their orientation in the bulb socket.Comments about the yellow color: The brightness of these bulbs are perfect and compliment the red taillights well. Bright enough to be seen in daylight without blinding drivers at night. The dim setting (used for the "edge marker" headlight mode on the front two bulbs) is also good. I did have to mod my flasher relay to prevent hyperflashing, which is no fault of these bulbs and would have to be done with any LED replacement due to the increased efficiency of the bulbs. Basically, I disassembled the Toyota flasher relay, desoldered the current-sense shunt (looks like a tall staple standing by the internal relays), and replaced it with a 0.1ohm, 1/2watt resistor. Now the original flasher relay is calibrated for LED bulbs. If I remove one, it hyperflashes again; and if I install the original bulbs, it only flashes once (overcurrent protection).Comments about the red color: The one thing I wish would be if the center disc of LEDs would go out for the dim/taillights function and light up only for the brakes, so that the contrast between taillights and brake lights would be a bit more. Currently, all the LEDs are either dim or bright; and on the Corolla, there is no filter over the top of the bulb, so the star pattern shows right through the lens, causing the taillights to be just a bit brighter than I'd like (but not blinding by any means). Overall however, I am very pleased with these LEDs.
Ol Ag 74
Reviewed in the United States on November 4, 2018
I have a 2015 Ford F-150. The pictures are a direct comparison of stock lights and Antline LED Bulbs. The left tail light was broken. I ordered a replacement which came with standard bulbs so I also ordered the LEDs. As a direct test I put the LEDs in the left light and left the stock bulbs in the right light. The pictures don't really show how much difference there is. Note the light on the driveway. The first picture is just the lights on. The second picture is the brake lights. The last picture is brakes and reverse. Note the light on the drive. I had no indication of problems from warning lights on the dash as others have reported. These are very bright lights and I would recommend them.UPDATE: The turn signal lights blink at a normal rate but the indicators on the dash blink faster. I can live with it.
Recommended Products
$187.16
$ 71 .28 $71.28