Your cart is empty.
Your cart is empty.Product Description
Compatible with Chevrolet Models:
- 2016-2019 Camaro (Coupe Convertible)
Reference Part Number:
- 23436517, 23436527, 23436524
Specifications
- Position: Front and Rear(Driver and Passenger Sides)
- Package Type: Box Packaging
- Injection Style: OE Replacement Molded
- Installation: Pre-Drilled (Direct-Fit)
- Color: Black
- Materials: PP+TPE
- Quantity of One Set: 4
An Average Guy
Reviewed in the United States on January 14, 2025
Installed these on a 2021 Camaro LT1 (for reference, it appears that these WILL work on any 6th gen Camaro).4 Stars because 1 or 2 pictures would have been useful.Each front guard is two pieces.One piece (let's call it a mount) has a hole that goes where the plastic plug is in the fender well (it's easy to spot). The mount then needs to push against the fender liner so that it wedges in between the fender liner and the fender body. (It has a lip on its outer edge, and this outer lip should not be visible if you've installed it correctly).I used 3 of the provided screws (on each side) to secure the front guard to the mount AND the felt liner behind it. So it's supported by both the mount and to some extent by the liner. Not sure yet how it'll hold up.The rear mounts in an immediately-obvious way.I installed everything without taking my wheels off.BUT I'm running r30 (I think stock is r40) AND I had to use a small socket wrench with a small converter (used a T15 head for the rear, and a philips head for the front).With most tires, you might be able to get away with jacking the car just enough in the rear to take the weight off the wheels.
JG
Reviewed in Canada on August 31, 2024
Fit well, easy to install. Very soft plastic, not rigid like I expected, but they look ok.
DI Taylor
Reviewed in the United States on June 7, 2023
Everything here pertains to installation on a 2017 Camaro 1SS. These splash guards are a perfect fit! Great quality, great price, easy installation! Take the tires off one at a time when installing these. The only tools I needed were a thin flat-head screwdriver and a T15 Torx. Look no further for splash guards for your ride!
Tara
Reviewed in the United States on September 25, 2021
Nice easy clean install love it on my Camaro
edgar fernandez RD4619
Reviewed in the United States on March 4, 2020
Excelente
RLB
Reviewed in the United States on October 4, 2019
like the look... installation instructions would have been nice... only used 2 of the screws provided... use the ones from the factory for the rear.. all in all not horrible once you figure it out
Recommended Products
$43.75
$ 21 .87 $21.87
$200.01
$ 74 .69 $74.69