Shopping Cart

Your cart is empty.

Your cart is empty.

Araca BL-FP190D /SP.73701GC01 (OEM Original Bulb Inside) with Housing for OPTOMA GT1080 HD141X HD26 EH200ST W316 X312 H182X BR323 BR326 DH1008 Projector Lamp

Free shipping on orders over $31.42

$86.11

$ 37 .71 $37.71

In Stock

1.Style:1 Count (pack Of 1)


About this item

  • Compatible Models: BL-FP190D /SP.73701GC01 with housing, including original bare lamp.
  • The new electrode can prevent the projector from overheating or abnormal temperature.
  • 5000 hours life, ECO mode longer life, 2800 lumens brightness.
  • Araca offers a 200-day warranty and if the bulb fails, we will immediately replace it for free or give you a refund.
  • Projector Model: fit for OPTOMA GT1080 HD141X HD26 EH200ST GT1080e DH1009 DW345 GT1070X X316 S316 W316 X312 H182X BR323 BR326 DH1008 Projector Lamp.



Product Description

Our attitude towards products and after-sales

  • In addition to focusing on improving product quality, we will always put customers first.
  • We will quickly respond to customer problems within 12 hours, and effectively solve the problem.
  • We will meet customer requirements and suggestions and provide customers with more support.
3

Araca Optical System & HD World

  • Araca is an electronic component R&D manufacturer and lighting system R&D manufacturer, we apply advanced optical technology to the projector light source.
  • We are eager to take you into a high-definition bright, and dynamic world.
  • We provide a 200-day return and exchange service, if the product fails in 200 days, we can replace it for you for free or return the full amount of the order to you.
4

Bulb model BL-FP190D /SP.73701GC01

Projector model (Ctrl+F to find your model)

OPTOMA GT1080 HD141X HD26 EH200ST GT1080e DH1009 DW345 GT1070X X316 S316 W316 X312 H182X BR323 BR326 DH1008 DS340E DS345 DS346 DW333 DW346 DX342 DX345 DX346 GT1070XE H112E PX3166 S310E S315 W300 W310 W312 X315 S312

The main parameters

  • Power: 190W
  • Output: 2800 lumens
  • Working hours:5000 hours
  • Period: 200 days
5

Innovative technology application

Araca creates high-end optical lighting technology, we focus on projector light source, stage lighting, 3D holographic architectural projection and many other fields.

6

Raise quality standards

  • Improve product quality on the basis of improving raw material testing standards.
  • The quality inspection team controls the quality of all processes for us.

How to extend the life of the projector bulb

1. After the shutdown, only wait for the fan to stop before disconnecting the power.

2. After turning off the projector, wait at least 60 minutes to reboot.

3. Do not disconnect the power directly during use.

4. No more than 4 hours each use time.

5. Make sure there are no obstacles around the projector to allow the projector to dissipating heat normally.

6. Regularly clean the dust inside the projector and the bulb, otherwise the elevated temperature will cause the projector shut down automatically to protect it.


Anthony
Reviewed in the United States on April 15, 2025
LIES! This product does NOT work with Optoma UHD60. The lamp is the same but the power connector does NOT fit.There are nubs inside the connector that prevent it from fully seating and one of the outside flanges is the wrong size so it would never snap in.
Optauser
Reviewed in Canada on June 8, 2024
installed bulb after return window closed (2 days after) and bulb failed after one use.
Bee B.
Reviewed in Canada on June 21, 2024
Will buy again, excellent replacement for my optoma hd27 3d
Ramen Payen
Reviewed in the United States on May 15, 2024
Installed in my Optoma HD142x, this bulb delivers vibrant and vivid images even in well-lit environments. Movies come to life with clarity as good as the OEM bulb that came with the projector.What truly sets this replacement bulb apart is its crisp image quality. Details are sharp, colors are vivid, and there's no distortion, even on large screens. The viewing experience feels professional and immersive.Installing the replacement bulb was a breeze, fitting seamlessly into the projector without any issues. Since installation, it has been performing flawlessly, promising durability and longevity.In conclusion, the Araca replacement bulb has exceeded my expectations, enhancing both work and entertainment experiences. If you're in search of a reliable solution that offers exceptional brightness and clarity, I highly recommend this replacement bulb.
Brian Hawkins
Reviewed in the United States on May 12, 2024
Bought this lamp in 2019 to replace the original in my projector. In March of 2024 it finally went out on me (with a bang) after just shy of 5 years and almost 5,000 hours logged all in dynamic mode. I could tell in the end it was near it's life, was still decently bright but had a bit of a flicker you could notice on solid colors. All in all, I'm very pleased, it exceeded my expectations.
Andre and Melissa
Reviewed in the United States on August 10, 2022
Bulb burned out and I originally ordered another brand. When I installed that brand the bulb just flickered and my projector would turn off. This bulb was a bit more expensive BUT is bright and works no problem. Easy to install and the projector is back up and working again. I got about 6,000 hours out of my OEM bulb, hoping to get close with this one. So far so good!
Rod Hendrickson
Reviewed in Canada on November 8, 2022
A lot of these reviews seem to be favorable because the company sent a replacement quickly after the initial one failed. I am in the same boat. Item arrived quickly installed easily, and worked fine for a few hours. Then the next time I turned the projector on, there was a dark shadow just off center, filling about a quarter of the screen. Seems like a dark spot developed on the bulb. Unwatchable like that. Contacted company who sent a replacement quickly. We will see how long this one lasts
Scott Fullerton
Reviewed in Canada on April 29, 2022
Worked great in my Optoma UHD60 until it just died out of nowhere after 86 days. Had some issues with Amazon getting in touch with the reseller. Eventually returned the item and later the resseler contact me directly and provided a replacement completely free of charge. Yet to test the replacement but will update if later if it was a single dud or overal product quality issues
Jedi Master Yoda
Reviewed in Canada on April 28, 2022
Everyone is looking at this bulb because it’s more cost effective than one from Optoma. The bulb I got first was defective and went dark VERY quickly and the company replaced it very quickly, like next day quickly. They’ve stated that they will replace it as often as needed over the warranty period which, in my opinion based on my experience, you can count on.The bulbs brightness seems pretty good. I can’t say for sure how it compares to the one that came original with the projector however we have no complaints with the brightness level. It just hooked right in with a couple screws and a molex plug.I have no qualms about recommending this product from a warranty and brightness standpoint. The cx reps are amazing to deal with.
G. Grumpz
Reviewed in the United States on January 10, 2021
UPDATE: COMPANY WAS GREAT TO WORK WITHTHEY SENT MW A REPLACEMENT BULB WHICH WORKED FLAWLESSLY IT WAS BRIGHT IT WAS JUST LIKE MY ORIGINAL BULB. I STILL THINK THEY NEED TO DO A BETTER JOB ON THE SILICONE SEAL THE CASING HAS BUT NOT THAT BIG OD A DEAL. THE COMPANY WAS AWESOME TO WORK WITH AND THE PRODUCT SUPERB.I had really bad experience with this item, I order it and the first bulb I received flickered and was extremely dark. Amazon sent a replacemt and this one looked great but within 30 to 40 mins it started smelling like a chemical smell was being burnt, I double checked installation and nothing was misplaced but the chemical smell was still coming out of the projector. I opened all my windows let it cool down removed the bulb and replaced it with an original bulb and no issues. I guess you get what you paid for I wouldn't recommend it at all.
Customer
Reviewed in Canada on July 3, 2020
The replacement fits like the original. The picture is as sharp and clear as new. Great product!
Jared
Reviewed in Canada on March 13, 2020
this worked great and has returned the brightness i was still using the original bulb at 4300 hours and decided to upgrade to this. can not speak to longevity and i will update if it dies early but so far everything worked.
Paul Maynes
Reviewed in Canada on April 5, 2020
The connector fit perfect, or so I thought. Inside I guess the pins were loose, or didn't connect fully, even though it was fully seated. So when I turned it one it melted the connectors on my projector and on the bulb. Smelled like burning rubber, and could have started a fire. I cut off the melted connectors, and bought new ones from CT. I contacted the company, they eventually got back to me and offered to pay for the fix, or give me another bulb but Alas afterward they ghosted me. So the bulb itself is working well, now. I would be very careful using this product.Edit: since the review I have been contacted by email multiple time by the company and finally they refunded the amount to fix the wiring that melted.
Recommended Products

$76.00

$ 33 .94 $33.94

4.4
Select Option