Your cart is empty.
Your cart is empty.Product Description
Daryl lippoldt
Reviewed in the United States on March 16, 2025
This is the one guys, idel, mid and high adjustable. Definate power adderFilter flange smaller than manifold flange
Don Daigle
Reviewed in Canada on March 13, 2025
Works very well on tecumseh snow king engines. Replaces original carb that can’t be adjusted.
Daniel Sidaway
Reviewed in Canada on March 12, 2025
Got my 8 hp Tecumseh snowblower running right out of the box, no needle adjustments to do.
Richard
Reviewed in the United States on February 26, 2025
I used this carb. as a replacemebt for my chipper.Workied really well
Chestnut
Reviewed in the United States on February 2, 2025
Fit perfectly on my Tecumseh 8 hp snowblower engine. The engine started right up!
Jean-Philippe
Reviewed in Canada on January 14, 2025
Je ne m'attendais pas à grand chose étant donné le prix mais au vu des commentaires positif j'ai donné une chance au produit. J'ai passé plusieurs heure à tapponer pour essayer de l'ajuster mais rien ne fonctionnait. Il semblait tirer de l'air à quelque par. Bref la qualité d'usinage n'est pas bonne et le carbu n'est pas étanche. Je m'en suis servi pour rebâtir mon autre et tout va bien maintenant .
Pascal Bourbonnais
Reviewed in Canada on December 28, 2024
Fit perfectly, engine started on the first pull.
SK
Reviewed in Canada on December 11, 2024
So much better then the NONE adjustable carb that was on my snow blower originally. Quick adjustment and the blower runs great.
Bill Schwab
Reviewed in the United States on October 2, 2024
I bought a 2 year old used snowblower that would only run with the choke out. I knew immediately it was a fuel issue so, changed gas, changed spake plug and it fired right up but still had to have the choke out to keep it from dying.Considering we live at 5,300' above sea level I started searching for different jets for the factory carburetorThen, I ran across this carburetor for a screaming deal price. Once it was bolted on, I fired up the blower, adjusted high speed then the idleThe engine runs smooth as silk nowThey never should have been forced to use fixed jet carburetors at the factory.This carb is as good as factory.
Marty
Reviewed in the United States on January 29, 2024
One of the best values on Amazon in my view. Bolted right up and with some fiddling worked great.
Jeff Thomson
Reviewed in Canada on November 15, 2023
This carburetor fit perfectly on my 40 year old 8/26 master craft snowblower. Just had to mount the old shroud bracket, choke linkage and hook up the fuel lines and then bolt the carb onto the manifold with the included gasket. After a few minutes of adjusting the snowblower was running like new again. Great product!
Customer
Reviewed in Canada on November 14, 2023
I don’t review stuff often, and I tend to have a hard time believing reviews. Bought this for a yard works 28” snowblower that has a tecumseh 8.5hp on it. Tried cleaning the old carb but without any luck, and it didn’t have any adjustable or removable jets. Figured at this price point it can’t hurt to try. Took a bit to get it dialed in, but it purrs like a kitten with this new carb. Direct bolt on, 0 issues whatsoever.
Gary
Reviewed in Canada on January 4, 2021
Bought this for my old Mastercraft Snowblower. It wouldn't run with the choke open, was surging and stalled repeatedly while running at half choke once warm. When I took the bowl off the carb, there was black sediment in it from the elastomers disintegrating. When I started researching an "O" ring kit, I found this entire carb at a lower cost, so went with it. Took me about an hour to install. It did come with the manifold gasket. Some other reviews claimed their's did not. The two holes for the shroud mounts screws were not threaded as noted in many other reviews. One reviewer said he just put the screws in and they self tapped. Since I already have a tap kit, I threaded mine. SAE 8-32 is the thread size for the screws from my OEM carb. There are two pieces from the original carb that need to be removed and attached to the new one. The carb shroud mounting bracket and the choke linkage. I have attached some photos showing the old and new carb for reference. This was a real easy install, but I only gave 4 stars because of the non-threaded holes for the shroud bracket. If it is the manufacturer's intent for these holes to be self tapped by the OEM screws, there should be some information to that effect so the buyer knows the proper method. Once installed, my machine fired right up and ran better than I have ever seen it. No snow to try it on at the moment, so I just ran it up and down the driveway to get it warm. Was able to run it with no choke almost immediately (it's just above freezing here today). I did not have to adjust the idle, or fuel mixture screws even after running to get the engine hot. They were both set at 1 and a half turns out from the factory. Way easier than a carb overhaul and I am not that mechanically inclined.
Recommended Products
CA $18.99
CA $ 9 .99 CA $9.99
CA $19.98
CA $ 8 .99 CA $8.99
CA $27.55
CA $ 13 .99 CA $13.99
CA $16.77
CA $ 6 .99 CA $6.99
CA $16.98
CA $ 7 .99 CA $7.99