Your cart is empty.
Your cart is empty."
Description:
Do not heat sea water or salt water
ST series pool heaters are special used for small pool less than 15CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability
Features:
Manual reset temperature control switch:Once unexpected high temperature 60℃ occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the ‘Reset’ button to restart the heater
Unique control system: ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature
Sensor technique are:
A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations
B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater
C. Avoid affection of ion accumulation to mechanical sensors
D. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy
Intelligent self-diagnose function:
The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens
If any fault happens, the heater is stopped immediately
Gretel Felizola Hermida
Reviewed in the United States on November 19, 2024
Arrived defective, never worked. doesn't have product support from the manufacturer. Just amazon returned me full refund, but I ended loosing $350 Installation from the Tech who installed it
ChaoworkzFromTx
Reviewed in the United States on November 16, 2024
12x24 oval - I live S of Houston Tx ---- I installed it myself - it would work fine for about 15mins and the breaker would keep tripping and wire/breaker would get super hot ---- followed instructions and there was only 1 video on youtube with the same model with very poor instructions/explanations....... my pool pump is about 30 ft from breaker box -- after about $200 in materials it was very annoying.... I was about to return it and get a different one -- Fortunately I called an electrician friend, and he helped me -(i'm sure a company would have been very expensive) ... This is what i used and is working perfectly -- Cable= 4awg (about $2/ft at HoDep) x2... Cable=gauge 6 copper-ground (about $1.2/ft)--- 100amp breaker ($ i already had one) (Gfci recommended- i did NOT installed) .... is heating up very good -- started at 73 and it took it to 83 in about 24hrs and at 90 in 12more.... based on the prices of other water heaters and counting the price of the materials i used (excluding my first $200) - i think is still a good deal. I hope this information helps you make a decision.
Recommended Products
CA $543.93
CA $ 99 .00 CA $99.00
CA $153.99
CA $ 71 .99 CA $71.99
CA $236.60
CA $ 99 .00 CA $99.00