Your cart is empty.
Your cart is empty.The Blue Sea Systems Class T fuse block is for use on systems up to 160 Volts DC and recommended by most inverter manufacturers for high speed response to short circuits. It features large heat dissipating tin-plated copper mounting blocks with large 3/8-Inch -16 stud terminals accept ring terminals for wire up to 4/0 AWG. Includes a clear insulating cover that satisfies ABYC/USCG requirements.
Jason Heatcoat
Reviewed in Canada on March 31, 2025
This is just a holder that can handle up to a 250amp t-class fuse. FUSE NOT INCLUDED.It's a good quality built holder and great it has the bolts to accept battery cable crimped ends, but the photo should be changed and a little more transparent that the fuse is not included. Since you will have to confirm the holes in the fuse you do buy, will have to have the proper placed hole dimensions for the bolts in this holder. Buyer Beware.
Zunivolo
Reviewed in Germany on January 23, 2025
Am Sicherungshalter ist absolut nichts zu bemängeln. Er ist unglaublich massiv und gut gebaut – Blue Sea halt. Dafür gäbe es 5 Sterne. Leider stimmt das Bild nicht und die Bezeichnung von 320 A ist blödsinnig. Viele Rezensenten haben sich offenbar überhaupt nicht informiert, deshalb hier ein paar Klarstellungen:- Das Bild entspricht nicht dem Produkt. Erhalten habe ich die neuere Version mit den zwei gelben Klammern.- Natürlich ist keine 320 A Sicherung enthalten. Wer sich halbwegs informiert hat weiß, dass eine Class T Sicherung genauso viel kostet wie dieser Sicherungshalter. Ja, sie sollten das Bild ändern, aber auf dem Bild ist auch eine 400 A Sicherung abgebildet, das sollte schon stutzig machen. Wer sich so wenig mit der Materie befasst hat, sollte vielleicht lieber nicht solche Sicherungen installieren.- Es muss nichts aufgebohrt werden. Es gibt verschiedene Größen an Sicherungen und dieser Halter ist für Sicherungen von 225 - 400 A. Diese passen wunderbar. Wer kleinere Sicherungen braucht, kauft das Modell für 110 - 200 A. Sollte man vielleicht im Titel und in der Produktbeschreibung explizit erwähnen. Man kann die kleinere Sicherung aber tatsächlich aufbohren und im "großen" Halter installieren. Könnte interessant sein, wenn man absehbar sein System vergrößern will und dann eine Sicherung größer als 200 A braucht.
Kindle Customer
Reviewed in Canada on April 7, 2025
Great to have, to bad the fuse itself is a separate order.For which the picture used to advertise is a bit misleading.
P. Holmes
Reviewed in the United Kingdom on April 7, 2025
I purchased this to protect my Lithium battery system. It took a while to arrive (over a week). It is definitely beefy and fit for purpose.
Roland C
Reviewed in Canada on November 8, 2024
The unit is advertised as a 320A fuse block. You will receive an empty fuse block capable of accepting 225 to 400 amp fuses. In other words a ZERO amp fuse block. Be aware.
Gerwin
Reviewed in Germany on August 26, 2023
snelle levering
Jason S Collins
Reviewed in Canada on October 30, 2022
I was really surprised by the size of this fuse holder. It’s what I wanted so not a big deal but I would suggest looking at the dimensions if you have space issues.
MmmikeeeB
Reviewed in Canada on January 22, 2022
Misleading pictures. Description read as though it included a 300 amp fuse. Not the case! No fuse included. Disappointing!Other than that, great quality.
guy st-laurent
Reviewed in Canada on May 16, 2021
Very good product and sturdy but don’t befoul by the picture, you only buying the fuse olde, you have to by the fuse separately ($$)
Ken K
Reviewed in Canada on January 9, 2020
Simply and well constructed, though somewhat steep on price. You have to buy the fuse separately, which adds even more to the cost. So overall it ends up to be quite pricey for what it is, though at least you won’t go wrong with the quality.
bernie melford
Reviewed in Canada on January 22, 2019
Pictures shows with fuse, gives impression you get the fuse with the block. Buyer Beware !!!!!!!
ItsAllAboutTime
Reviewed in the United States on January 21, 2017
when you read that this is heavy duty, that doesn't do it justice. It is massive and up to the task of providing a way to mount the 400 Amp fuse I needed. I am surprised that product information is so sparse. The 3/8" studs and bolts are 1-7/8" on center for the Fuse and the cover easy accomodates up to #4/0 cable lugs. The fuse probably should not be shown, since it doesn't come with it. It can accept (like it shows 225 to 400 Amps). I previously installed a cheaper fuse block, which was not up to the task... there is no substitute for quality and when protecting your RV, peace of mind is king.
Revued
Reviewed in the United Kingdom on August 13, 2013
Needed a really beefy fuse holder for my boat battery bank / inverter . This product exceeded my expectations, was delivered promptly and met the product description in every one.
Recommended Products
