Your cart is empty.
Your cart is empty.Package List: 1 x Spring Steel Plate
Customer
Reviewed in the United States on July 1, 2024
I use this chameleon build surface sticker on my build plate for my Anycubic 3D printer. It works well, and I definitely recommend it to others.
Ryan
Reviewed in the United States on June 26, 2024
These stickers are easy to apply, much easier if you print out a jig to do it. The PEY surface is perfect for printing PLA. It has no adhesion issues, and transfers the pattern amazingly. These are perfect rather than buying a entire new build plate if you have a damaged/worn surface.
Jimmy
Reviewed in the United States on June 18, 2024
I use this to make high temperature ASA parts and it works great. I did have to lower my nozzle height (compared to stock Prusa sheet) a little bit first, but after that adjustment it works great. Holds very well during printing, let it cool and parts almost fall off.It's good to find a company that makes a quality product but doesn't gouge the customer. Very good value.
Oz
Reviewed in the United States on March 25, 2024
I have a Prusa MK4 (MK3 upgraded). I destroyed my smooth build sheet by installing self-adhesive print sheets on it since I had a terrible time making anything stick. After reading through the reviews and seeing problems with sticking and bubbles on the smooth side I decided “what the heck” and ordered one; there were enough good reviews to offset the bad ones.When the double-sided sheet came in, I noticed that it had bubbles on the smooth side, just like one of the reviews. I thought OH GREAT! I pressed the bubbles out then thought it sure acted like a protective film; like another review said it did not have. I scratched the edge and sure enough it was a protective film. I removed the film and wiped down both sides with 91% isopropyl alcohol then set up my first print on the textured side. My first dozen or so prints using PETG were perfect. Adhesion was great and when the sheet cooled, the parts released by themselves.I then had a couple of quick prints with PLA that went off without a hitch. Sixty degrees was not a problem. Then I remembered another review that said the sheet can't handle 100 degrees without warping. I switched to ABS and ran the sheet up to 110 degrees for a 12-hour print. When I woke up the next morning the print was done and sitting on top of the sheet. I set up for a half dozen more prints with ABS (2 – 6 hours each) and they also printed perfectly. Adhesion was perfect and release was perfect as well. There were no problems with warpage or anything else. Best guess on the warpage and bubbles reported is that the user's printer bed did not have magnets that would hold the magnetic sheet properly and protective film was left on the other; but I digress. 😊I have not used the smooth side yet because the textured side makes a beautiful bottom layer. I used to like the Prusa textured sheet, but this one is now my favorite, by far. I have only used this product for a couple of weeks now so I can't speak for its durability… yet. However, I can say that so far it has performed flawlessly with everything I have thrown at it. Adhesion, even on some tall parts with a small footprint, was perfect. Release was effortless; if left to cool, the parts almost always released themselves and sat on top of the sheet. If removed while hot, a quick bend and they popped right off and I was ready to start the next print. I'm thrilled with this double-sided build sheet and will definitely buy again. If you’re on the fence, go for it. I don’t think you can go wrong.
JB
Reviewed in Canada on December 5, 2024
Feels a lot lighter and thinner than the stock plate, but has worked well so far
Rob Perticari
Reviewed in the United States on November 23, 2024
I absolutely love these plates over the stock Bambu plates due to the finer texture of the PEI coating. The adhesion is great with both PLA and PETG (that's all I currently use). They've held up great to 100's of hours of printing and require very little maintenance, absolutely no complaints!
Recommended Products
