Your cart is empty.
Your cart is empty.
Description:
output shaft direction of the motor shaft is arranged vertically, the entire body of the motor output shaft relative to the general direction of gear motor short, widely adapted to a number of installation dimensions of the requirement occasion.
Specifications:
Rated Voltage: 12V
No-loading Revolving Speed: 100rpm / 40rpm / 30rpm / 20rpm / 10rpm(optional)
Weight: 165g(approx.)
Wiring Methods:
Red: Motor power + (exchange can control rotating and reversing)
Black: Coding power- negative (3.3-5V) polarity cannot be wrong
Yellow: feedback
Green: feedback
Blue: Coding power + positive(3.3-5V)polarity cannot be wrong
White: Motor power - (exchange can control rotating and reversing)
Package Includes:
1 x Motor
Michel
Reviewed in France on March 31, 2025
Le moteur est très bon et régulier, mais le cablage est très fragile et casse aux manipulations. Et seulement 2 fils sont nécessaires sur les 6. Aucun mode d'emploi n'est fourni pour savoir la fonction de chaque fil, ce qui oblige des essais. Pour plus de solidité, il faut regrouper 2 fils ensemble après avoir vérifié qu'ils ne sont pas incompatibles.
_Cust_PW
Reviewed in the United States on January 19, 2025
Good for my micro-controller project, with variable-speed and direction control from the Arduino through a high-power H-Bridge single-motor driver module.
Client d'
Reviewed in Canada on April 1, 2024
pour activé un treuil pour ma tour de fusée
kswaid
Reviewed in the United States on September 12, 2023
The motor is decent but mine came wired completely different from the diagram provided. Double check everything before you use it.
Smartbot
Reviewed in the United States on August 16, 2023
Los motores se ven bien, no es lo mejor del mercado pero funciona. Algo que no me gustó fue que tienen un juego al mover el eje del motor con la mano, de adentro hacia afuera del eje y lo mismo si lo giras de adelante hacia atrás.El producto llegó 2 días después a pesar de pagar el envío.
Certified Customer
Reviewed in Canada on June 20, 2022
No documents and explanations how to use the encoder, which is not a real encoder, but a magnet rotating around two Hall effect sensors, which means you still need to write a ton of code to make it work by measuring the rotations (unlike real encoders which simply give you a number for rotation degree). I bough this two times for the good price ($8 for the 100 rpm), but after some use the worm gear develops a big backlash and moves freely a few degrees, which translates into few centimeters when the radius increases. Very disappointed.
Tony Young
Reviewed in Canada on December 30, 2020
I do not know what the wiring diagram is
Brady
Reviewed in the United States on December 28, 2020
These motors are super powerful, and for their form factor hard to beat.Personally I am using these for motorized blinds. They cannot be back-driven, draw roughly under 1A when under very heavy load, and are in a relatively small form factor making them perfect for my application.If I had a few pieces of feedback- I wish the molex connector came out perpendicular to the encoder circuit board rather than parallel like it is now- the bottom of the gearbox is a very awkward shape, and it would be much easier to design a mount for it if it were rectangular rather than angled like it is currently- the price is slightly more than I wish to pay. For my application it was perfect, so I am willing to pay the premium, however i will avoid them if possible for other projects. If these were roughly $8-$9 a piece I would be using them in most all my projects that require high torque.
linda f.
Reviewed in Canada on January 9, 2020
Was lil small can't use it but arrived on time
Customer
Reviewed in Canada on March 16, 2019
Good motor to control the windows covering. We used it with an ESP8266 and ESPEasy microcode for IOT.
Matthew Remington
Reviewed in Canada on April 22, 2019
The tiniest bit of play, but super stiff beyond that initial movement. Around 6400 pulses per revolution on the 10rpm motor.
Omar
Reviewed in Canada on June 3, 2018
Not enough torque
Michael Langevin
Reviewed in Canada on June 20, 2018
Exactly the torque I was looking fore. Gearbox is easily accessible if you need to check assembly. Ratio good.
Recommended Products
