Your cart is empty.
Your cart is empty.Product Description
Product Description
How to use it?
First connected battery; Second connected solar panel; Third connected load.
How to adjust the float voltage?
Step 1: The system default float voltage is 13.7V, but you can change it according to your needs. Press MENU to enter the parameter page and find the floating charge voltage page.
Step 2: In floating charge voltage interface long press 3-5 seconds MENU to enter setting and using UP or DOWN to set the floating voltage
Note:
- This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power.
- The LCD display has an error of 0.2 V- 0.3 V, but this is normal.
- Old batteries may be degraded the capacity after hundereds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally “DEAD”).
- The working temperature of this controller is -35°C to +60°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation.
You'll Receive:
1Pcs Solar Charger Controller
1Pcs User Manuel
B. Thomas
Reviewed in Canada on July 5, 2024
I didn't expect too much out of this, but I did expect it to work, lol.
Kevin R.
Reviewed in Canada on January 22, 2024
Haven't tried it yet
Jennifer Rice
Reviewed in the United States on August 20, 2023
When I press the menu button, nothing says what the settings are for. Do you have a manual?
Michael R.
Reviewed in the United States on November 19, 2023
I can not set the float charge lower than 28v. Tried with the up and down buttons. Not any lower. I have a brand new 12 v battery an 60 w solarpanel. Does it think I have 24v system?
Recommended Products