Shopping Cart

Your cart is empty.

Your cart is empty.

Double-Sided Textured PEI Building Plate Flexible Steel Print Bed Compatible with Sovol SV01 SV01 Pro SV02 QIDI X-Max/X-CF Pro

4.7 (5) Write Review
Free shipping on orders over $29.99

$26.40

$ 12 .95 $12.95

In Stock

1.Size:300*255mm


2.:Double-sided Pei


  • Great quality: This product consists of a magnetic base and a flexible stainless steel, which is equipped with a PEI surface. Can provide good adhesion for printing consumables. When printing PLA filaments, the temperature of the hot bed is set to 60°C, and PETG must be set to 85°C.
  • Easy to use: Peel off the protective layer of the lower adhesive tape, stick the magnetic base to the heating bed, the flexible rust-proof platform can be easily attached and removed.
  • Applicable 3D printers: 300 x 255 mm (11.81 x 10.04 inches) size, which can be used with Sovol SV01 SV01 Pro SV02 QIDI X-Max / X-CF Pro and other 3D printers, has the same size hot bed.
  • Large magnetism: The rubber on the bottom has high-quality magnetism and can still maintain strong magnetism when heated to 120°C.
  • Please note: The thickness of the product itself must be leveled again after attaching this item to avoid damage to the surface. It is easy to remove the print model when the temperature of the heating bed drops. Please leave a small gap such as 0.1-0.2 mm when leveling the platform, which can provide you with a better experience.



Cliente
Reviewed in Italy on March 18, 2025
Ottimo prodotto
Kyle
Reviewed in the United States on January 21, 2025
I upgraded to this pei bed after printing on glass for years. It makes a huge difference in how well prints stick and doesn't require any glue stick. The spring steel is really nice. Pay close attention to how it directs you to install the magnetic base so that you get it on your bed straight.
John Richards
Reviewed in the United Kingdom on April 25, 2025
perfect
Álvaro
Reviewed in Spain on August 29, 2024
Compré la versión con patrón en ambas caras, carbono y liso para la impresora cr-10 (310*310) y encaja a la perfección. Ambas dejan la primera capa con esa textura. No he necesitado añadir ningún fijador, al menos con PLA y TPU que es lo que he probado. El montaje, es sencillo pero no vayas a lo loco, despega la pegatina poco a poco y pon a precalentar la mesa para que resulte más fácil.
Cliff mellangård
Reviewed in Sweden on March 24, 2024
Could not find for my creality cr-5 pro so got this and cut it to fit.Best investment for it in a while.
Recommended Products
Hotbed for TINA2S 3D Printers

$36.22

$ 17 .99 $17.99

4.3
Select Option
Bambu Lab PEI Sheet for Bambu Lab X1/X1C/X1E/P1P/P1S/A1 3D Printer 257 x 257mm Textured Double Sided PEI Heated Bed Spring Building Plate, Flexible Platform

$20.94

$ 9 .35 $9.35

4.7
Select Option
IdeaFormer-3D Smooth PEO+Textured PEI Sheet 310x320mm, PEO+PEI Spring Steel Plate with Magnetic Build Plate for Ender 3 Max, Ender 3 Max Neo, CR-10 V2, CR-10 V3, CR-10S Pro, CR-X 3D Printers

$35.47

$ 17 .27 $17.27

5.0
Select Option
Double Sided Build Plate 254x241mm for Prusa I3 MK3 MK3S MK4 MK2.5S 3D Printers for Professional Printing

$16.90

$ 7 .91 $7.91

5.0
Select Option
Upgraded 220x220mm Flexible Build Plate for Artillery Genius/Pro, Double Sided Smooth PEK+PEC Spring Steel Sheet Double Removable Platform without Magnetic Base for MK2/MK2A/Anet A8/Anet A6 3D Printer

$19.74

$ 10 .07 $10.07

4.5
Select Option
Flashforge 3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker fit Adventurer 3, AD3C, Adventurer 3 Lite (5pcs)

$24.46

$ 12 .95 $12.95

5.0
Select Option
PEI Sheet Magnetic Flexible Heated Bed, PEI Spring Steel Plate with Magnetic Base for Voron 120x120MM, PEI Panels Print PLA, ABS, PETG, TPU, Ect

$16.44

$ 8 .63 $8.63

4.8
Select Option
FYSETC SV06 Plus Build Plate - Smooth PEI+Textured Print Bed - K1 Max 310x320mm Sheet: Double Sided Spring Steel Platform for Sovoll SV04/Ender 3 Max NEO/CR-10S PRO V2/Kobrra Plus(with Magentic Base)

$67.06

$ 28 .79 $28.79

4.5
Select Option