Your cart is empty.
Your cart is empty.Product Description
Made of high quality aluminum and treated with anodizing finish, the enclosure is durable, corrosion-resistant, will give your project a professional look and also can serve as a heat sink.
With removable ends and sliding extrusion, your projects can be mounted inside the enclosure and accessed with ease.
The extrusion has one built-in slot near bottom for holding PCB.
I. P. FREELY
Reviewed in the United States on May 5, 2023
It's a case. It works. Size was correct. What more can one say?
Electron125
Reviewed in the United States on January 16, 2022
With removable ends and top, projects can be mounted to the box and accessed with ease. Aluminum makes a great heat sink, and I mounted a variable voltage regulator on one end and two insulated female jacks on the opposite end, one for input voltage, and the second one for output voltage. Project was made for a specific voltage, so no access was necessary for voltage adjustment. The aluminum box is not sealed or waterproof, but project was made for in-house use.
Kathy Alexander
Reviewed in Canada on July 7, 2021
Quick delivery and use.
Robert L.
Reviewed in the United States on May 7, 2021
Yup... 94.8 mm x 100 mm for a board outline that will slip into the pcb slot in the base.Copied from a previous review... Trust but verify... Verified!It's exactly as you'd expect from the photos.I put a 94.8mm x 100mm PCB in it and it slid in perfectly. This is the perfect size enclosure if you have tall components and also want to keep the board size inside the 10cmx10cm limit to get really cheap boards from china.
Maurice
Reviewed in Canada on May 4, 2021
This is an extruded aluminum box, comprising two halves that slide together and two end-plates that screw on. The fit and finish is good. We took off a star because one of the eight screw holes that hold the end-plates was not tapped. Luckily, I have the correct metric tap in the garage. We are using it to house two solid state relays; being aluminum, it will not only protect the operator from shocks, but it will serve as a heat-sink for the SSRs.
Glen
Reviewed in Canada on March 11, 2021
Just as discribed.would buy again
GARRY T
Reviewed in Canada on January 13, 2021
Fit and finish is excellent! The enclosure is a lightly textured silver satin anodized finish which looks great as is or would easily take a coat of paint if desired. One thing to be aware of is that the top of the box slides into the lower extrusion. While this makes for a very sturdy enclosure it also means that either front or back panels must be completely removed to gain access to the inside. This could be problematic depending on the nature of the component mounting and wiring and needs to be considered in the project design.Noting that issue I still give this enclosure a 5 star rating as a quality enclosure at an excellent price.
Glenn Brown
Reviewed in the United States on February 10, 2020
I was pleasantly surprised that the body slides apart smoothly into 2 prices when the ends are removed, for easy access to parts I mounted inside. The sliding extrusions fit beautifully.
Michael Hasenfratz Sr.
Reviewed in the United States on April 22, 2020
They would sell more of these boxes, if you didn't have to buy one, just to get the inside dimensions.
Recommended Products
$625.40
$ 74 .69 $74.69