Your cart is empty.
Your cart is empty.Product Description
Alfred E Numan
Reviewed in Australia on June 9, 2024
Well made, easy to install and put together. Well packaged. Happy
Charles
Reviewed in Australia on June 5, 2024
A very smart looking case, compact and clean.Even came with spare screws.The fan is quiet as advertised, obviously isn't completely quiet as is any fan.I don't need the case for the fan, the PI has proven to run under super hot conditions under the hot Aussie sun in an enclosed waterproof box, got very hot, melted the 3D printed case I had in there, so this fan is there to help it run better under heat. Overall, very satisfied.
Hasen Alshehri
Reviewed in Saudi Arabia on November 24, 2024
جميل جدا
Frank Thompson
Reviewed in Canada on October 26, 2024
Great little case, comes with everything you need, heatsinks, screws and fan. Only reason I give this a 4 is because the fan is loud and annoying, but it does move a lot of air. If you are not using your pi for heavy applications, don't bother installing the fan, other wise find a fan that is quieter.
Salam Gabran
Reviewed in Canada on October 16, 2023
I am running Home Assistant on RPi4 which is a server running continuously and this keeps the RPi at high temperatures continuously. This enclosure keeps the RPi cool, and it almost not audible.The drawback is, the cover does not have a latch or plugs to lock itself to the case. It only has 4 pins to align to the case, but the pins do not lock in to the case. In my setup, the enclosure is laying flat, but if you would need to mount it upright, the cover will not stay in place.You can use a zip tie or velcro tape, or look for something different.Given the price and low noise, it is good for some setups.
Bob L.
Reviewed in Canada on January 28, 2023
I previously had a large heatsink & dual fans case for a Raspberry Pi 4. However one fan started to make a high-pitched noise, and the other fan.... never worked. Since these were 30mm fans, replacements were as cheaply made as the originals, which prompted me to buy this case instead. This one comes with a 40mm fan, which could be replaced by a Noctua fan I already have if need be. But the included fan is pretty much silent! Installing the included heatsinks was easy, the Raspberry Pi is well secured, all the needed plugs are accessible and it stays cool. Very happy with my purchase so far.
Josh Tebo
Reviewed in Canada on September 10, 2022
The media could not be loaded.
Joshua Boniface
Reviewed in Canada on June 26, 2022
Not too much to say other than I like it. It's a great little case that snaps together well and holds snugly, and the fan keeps a Pi4 cool with minimal noise. I bought two for two different applications both with highly-loaded Pis and they keep them cool and protected. Would definitely recommend and if I get more Pi4s in the future, another of these cases will be bought with it!
Shanthanu Varma
Reviewed in Canada on December 26, 2022
I was using the default case and fan that came with my pi 4b. That was super loud. In the middle of the night the fan noise would shoot up and wake everyone up. I have to go tap it hard with my finger to shut it down.This case ensures good temperature management as well as low noise levels. It has been over 2 months and this works perfectly. Was easy enough to install, Love it.
Jesse Weisner
Reviewed in Canada on February 2, 2021
This is a great case with decent airflow, and it includes a quiet fan and heat sinks to add to the RPi 4.One thing to note, though: the lid won't quite close with a PoE Hat installed. The lid will stay attached, but raised on one side. The heat sink on the PoE Hat interferes with one of the included RPi heat sinks, so it will have to be left off. It would be nice if they would add a millimeter or two to the case height to allow for this.
Customer
Reviewed in Canada on July 4, 2020
I have had my raspberry pi on for several days and it is still cool as a cucumber.
Malor
Reviewed in the United States on June 3, 2020
I bought a different case with my Pi 4 that was pretty terrible; it had a hole over the GPIO pins so huge that you might as well not even have a case at all. And the fan it came with was dismal, horribly whiny and nasty-sounding, and started to fail within a couple months of install.This case is much tighter; the lid has a small gap on the side to let you get GPIO wires through, but not so much that it compromises the case. And this fan is nice and quiet and moves a lot of air. Further, it's a standard size, so if it does fail, it's easy to replace just the fan, without having to buy a new case.I quite like this design. Good outfit.
R. Berry
Reviewed in the United States on September 24, 2019
Very solid and well built case. Easy access to the internal connectors and gpio pins. It also includes a heatsink for the USB chip, something a lot of other cases do not. Be aware that the hdmi ports are set slightly back and are not flush with the case. Some hdmi cables will not work because the tip is too small (see picture). The Phillips cable works. The adapter is too short. You can shave back the plastic on the connector to expose more of the tip or make the opening in the case larger. The negative black connector from the fan (see picture) needs to bent slightly because of an obstruction from the case.
Recommended Products