Your cart is empty.
Your cart is empty. Rated Voltage: DC 12V
Reduction Ratio: 1:634
No-Load Speed: 10RPM
Rated Torque: 40Kg.cm
Rated Current: 1400/1280mA (Positive Rotation / Negative Rotation)
Error: ±10%
D Shaped Output Shaft Size: 8*15mm (0.31" x 0.59") (D*L)
Gearbox Size: 58.1 x 40.11 x 36mm (2.29" x 1.58" x 1.42”) (L*W*H)
Motor Size: 31 x 57.2mm (1.22" x 2.25") (D*L)
Mounting Hole Size: M4 (not included)
Main Material: Metal, Electronic component
Wire Length : 20cm
Packages:
- 1 x Worm Gear Motor
What does motor torque mean?
The standard torque of the motor is 10kg.cm. If the belt wheel is used for transmission, the belt wheel has a radius of 1cm, and the output tension of the belt is 10kg.
If the belt radius is 2cm, the output tension of the belt is 5kg, and so on.
PLEASE NOTE:
1.Use tolerance: Pay attention to the use of voltage and current range, otherwise the motor performance and motor life will decline.
2.Handling motors: Gently, as far as possible the use of motor shell part.
3.Motor wiring: Red lead to the positive electrode, black lead to the negative pole, if reversed, the motor rotation in the opposite direction.
4.Overload: As far as possible within the specified load range, prohibit motor blocking or close to the stall state for too long time to runs. Otherwise, the motor will burn out.
5.Motor storage:
-- Storage temperature: 0℃ - 40℃;
-- Storage humidity: 15% -90% RH;
-- Avoid placing in high temperature, high humidity and corrosive gases.
6.Motor use temperature: 0℃ - 70℃
Frank
Reviewed in the United States on January 7, 2025
I use the gear motor to rotate a solar drum composter. The gear motor has been working for over a year and has a runtime of two hours daily. The needed torque in this application is close to the manufacturer's highest recommended torque. I greased the gearbox with plenty of Timken wheel-bearing grease.
Dalamar
Reviewed in the United States on July 6, 2024
Used this with the shaft mount adaptor. Worked great
Richard Raines
Reviewed in the United States on November 24, 2024
To power a robot movement.
Steve Brandenburger
Reviewed in the United States on June 18, 2021
This is a good motor / gear reducer for the price, BUT I had to return the first one they sent and request a replacement. I installed the first and it worked several times, then quit. I noticed the gear reducer cover looked a little loose so I took it off. A gear had broken. I installed the second and cycled it 10-12 times and checked the cover. All 4 screws were backed out about 4 threads. I had to remove the motor and tighten the screws using a small screwdriver and a pliers. The manufacturer needs to ensure the screws are torqued during assembly.
Customer
Reviewed in the United States on March 17, 2021
have purchased many - always pleased
Recommended Products
$89.24
$ 41 .75 $41.75