Your cart is empty.
Your cart is empty.Amazon.ca Product Description
Greenlee's carbide tipped hole cutter set has multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over drilling. Replaceable cobalt steel pilot drill, with split point tip design, to improve performance and resist walking, eliminates need for center punch. Set includes 7/8-Inch , 1-1/8-Inch , 1-3/8-Inch cutter heads.
From the Manufacturer
Greenlee's carbide tipped hole cutter set has multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over drilling. Replaceable cobalt steel pilot drill, with split point tip design, to improve performance and resist walking; eliminates need for center punch. Set includes 7/8", 1-1/8", 1-3/8" cutter heads.
T H
Reviewed in the United States on June 8, 2020
the 1 inch and 3/4 inch have worked GREAT since day one and continue to work as they should. The 1/2 inch, is NO good. i do not understand how it could come from Greenlee and not work at all. something very defective in the 1/2 inch hole saw.
erivas
Reviewed in Mexico on April 6, 2020
Bien
Tirrell N
Reviewed in Canada on July 28, 2019
Broke a carbide off first time using, pilot bit broke on another first time, life used these a long time so it wasnt for inexperience I just didnt seem strong enough for cutting into panels.
Rick
Reviewed in Canada on June 6, 2019
Works great.
Phil G
Reviewed in Canada on January 8, 2019
Lasts much longer then the competition
Hardave
Reviewed in Canada on September 9, 2018
Bits will chip and break over time. Been a year and I've already chipped the 1" and broken one pilot bit. However they're great for what they do. Perfect hole every time.
Customer
Reviewed in the United Kingdom on May 3, 2018
Absolutely awesome performance - Cuts mild steel sheet without a problem. Chips and clears chips well. Nice finish to the cut. Used in electrical enclosures. Outlasts holesaws 10 to 1.
Af Yazd
Reviewed in Canada on August 17, 2017
These speed cutters lasted me about 30 holes each until the1-1/8" and 7/8" bit got completely shredded drilling through only some mid gauge steel stud (which is completely within the specs of 8 gauge). I used the 1-3/8" bit on the same studs and didn't have a problem and is still in good shape so it seems like it was possibly a bad batch or something.To say the least, I am disappointed with Greenlee since they usually carry good quality tools (not in this case), but it seems like more and more brands these days are shipping manufacturing overseas to China to save a few bucks while compromising quality.I will contact seller and update review if I hear back on refund or replace
US Grant
Reviewed in the United States on November 17, 2017
I have only been using this set for one day and will come back after several months and write a supplement to this review. Based on heavy usage of this entire set for a solid day cutting thick sheet metal, it is outstanding. The headline to this review says it. It is truly like cutting through butter with a hot knife when using these on sheet metal.
Fred De Tech
Reviewed in Canada on March 10, 2016
Clean holes - quick cut.
Jonathan Hubert
Reviewed in Canada on February 13, 2016
Cuts very clean accurate holes in little time.
Customer
Reviewed in Canada on November 26, 2015
Grenat tools. Do neet hole. Easy to use. Fast
rdagger
Reviewed in the United States on January 26, 2013
I had to cut 1-1/8" holes in a 14 gauge stainless steel box (about 1.9mm thick). First I tried a Bosch bi-metal bit and it barely scratched the metal before it was toasted. The Greenlee kit looked like a good solution. It is expensive but these are handy diameters for electrical conduit (1/2", 3/4" & 1"). The bits seem to be very high quality. There is a plastic case that protects the bits and has a recommended speed chart. The chart recommended 375 RPM for stainless. I had to cut at 620 because that's the lowest on my drill press. I went slow and used lots of cutting fluid. It took a while but it made a clean hole and the bit still looks new. The spring on the bit worked well to eject the metal donut after the cut. The maximum cutting depth is 8 gauge (4mm). The kit includes the 3 hole cutters, an extra pilot drill and a hex key.
Recommended Products
$90.90
$ 45 .26 $45.26