Your cart is empty.
Your cart is empty. -Specifications:
Light Color: Red, Amber (As Pictures Show)
Tube Strip Length: 29cm/11.5 inches (Approx.)
Working Voltage: DC12~24V
Material: PVC
Waterproof：IP67
-Wire Connection and Functions:
Red: Running Taillights, Positive, shows Red Color
Black: Earth wire, Negative
Yellow: Brake Light, shows Strobe Red Color
Blue: Left Turn, shows Flowing Amber Color
Green: Right Turn, shows Flowing Amber Color
-Tips:
1.It is not recommended that you cut the strips, and don't stress or bend the cables too much.
2.Be careful, when you try to open the headlight to install them.
CSo
Reviewed in the United States on May 12, 2023
Why do I think this?1. You can not hit the brake and signal at the same time. If you signal and then pull the brake it will blink and no direction will be shown. You have to pump the brakes so the signal shows when you let go.2. Brake is blinking not red to bright red. I thought it would go solid bright after a few seconds of blinking but all it does is blink. Check your state laws on what is a legal brake. In some, it may.3. Wires take a bit to figure out. If you have a motorcycle battery around start with black on the ground and then try each on positive and label.For now, it's on the bike and I will get an inspection. Let's see if it passes. If it does I will share here.
Marc
Reviewed in France on November 11, 2022
Mauvaise étanchéité au niveau du câblage...retour produit
Éric Lafrenière
Reviewed in Canada on July 7, 2021
Parfait
Recommended Products
