Your cart is empty.
Your cart is empty. * 12 bright RGB LEDs, 200 Lumens, 10 color changing light, 1.5W, DC 5V, lifespan is 30,000 Hours.
* Powered by 3.7V 5000 mAh internal Lithium polymer rechargeable battery.
* 2 ways operate: motion sensor or remote control.
* The remote control will operate ceiling light within 20 meters.
* Remote control battery (1*CR2025 or CR2032 button cell battery).
* Easy to install with screws(included).
* The power indicator light will illuminate red when the USB cord is plugged in. The power indicator light will flash after the battery has been charged for 95%. The power indicator light will auto off once the battery has been fully charged.
INSTALLATION
Detachable Bracket with metal plate and Screws (included).
1.Remove the mounting bracket from the back of the light base. To do so, firmly grab the light base (not light head) & pull out the mounting bracket from light base by the tab of the mounting bracket.
2. Using the detachable mounting bracket as a guide to mark & drill two (2) pilot holes in the location where you want to mount the light.
3. Place 2 screws into the mounting bracket and pre-drilled holes. Tighten screws into the mounting bracket until it is secure to surface.
4. Replace the light to the mounting bracket by aligning the magnet on the back of the base to the metal plate of the mounting bracket.
Packing List
- 1 x LED Spot Light
- 1 x Remote Control
- 2 x Screws
- 1 x Micro USB Cable
- 1 x User Manual
spick
Reviewed in the United States on December 23, 2023
Wanted extra light over the kitchen sink. Rechargeable and installation was easy. Attach the base and light magnetically attached to base. Can be removed easily when needs recharging. Come with a remote and multiple colors other than normal light. Motion sensor is very sensitive.
Erica
Reviewed in the United States on December 11, 2023
I requested this light as I am currently trying to find a good setup that will allow me to get some light into my backyard as well as alert me to the possibility that someone may be on my property. I just moved into my home and it seems that my unfenced backyard was a sort of shortcut walk way for other trying to get into the neighborhood behind me as well as the local homeless camp. The area that this worn down trail is perfectly tucked away in the part of the yard that is completely void of light at night and really difficult to see if attempting to do so from the backdoor. So I fumbled upon this light and thought maybe it could work for what I had intended to do to eliminate the darkness or unknowing. The corner of my home is pointed perfectly towards this area and isn't too far off.When I received this light I was a little worried that given its size it would be able to handle lighting up the area to a point that I could see if anyone was there but still gave it a shot. Setting it up was simple enough and I could get to easily enough when it came time for a recharge. My issue is that while it is install and could work if I just left on the motion sensor setting it just refuses to do anything in response to me using the remote. I have tried everything I could possibly think of to figure out what gives to no avail. There weren't any include instructions or troubleshooting for the remote so I have just been left in the dark. The remote capabilities was the 1 reason I decided to even give this unit a try and it doesn't even work. I have since brought down the light and have replaced with a completely different setup.Don't waste your time....
Recommended Products
$47.50
$ 20 .36 $20.36