Your cart is empty.
Your cart is empty.REAR WHEEL WELL GUARDS
Jon Walker
Reviewed in the United States on January 12, 2025
I would recommend trying another brand as the fitment was not satisfactory. I had to trim the ends to make it fit okay. “Most” of the holes matched the factory, but not all.I would love to send back and get a refund, but I already “made” them fit with some cutting.Perhaps the Rough Country version fits better?
JOe
Reviewed in the United States on September 5, 2024
Great product. Durable. Fitment was perfect. Easy to install. Helped improve the look and protect from road debris, mud and dirt.
Timothy E. Vidal Sr.
Reviewed in the United States on August 28, 2024
The pictures are before and after on my 2024 GMC SIERRA Elevation. GM decided to cheap out on wheel well protection for the bed. Thankfully, the aftermarket took notice. These Husky liners fit perfectly and were very easy to install. Truck looks so much better with the liners in place! Quality appeals to be very good and they are made in the USA!
Customer
Reviewed in the United States on August 12, 2024
Awesome for the price I paid. I got a damaged box for half the price, so I can't complain about it. The guards were brand new and all the hardware included.I watched the Husky installation video and they said 30 minutes from start to finish, not quite. I struggled for about an hour or more on the driver's side. It was very difficult to get the ends up over the lips of the bottoms. I ended up having to remove the plastic rock guards to give me an extra 1/2" on both ends and still had to use a heat gun to make it more pliable to get it.On the passenger side, I set the guard out in the sun for about an hour and that one went in a lot easier, about 15 - 20 minutes.To remove the rock guards, you will need a T-15 torx driver. If you leave the tires on, you will need a small, short bit and wrench or ratchet to get in there. If you take the tires off, I'm sure it would be easier, but add more work to jack up the truck, remove and reinstall the tires.Overall, for the price I paid, it was worth it and now it's done. If I had paid full price, I may not have kept them.
Michael M.
Reviewed in the United States on July 20, 2024
Great price, great quality, great fit, installation instructions not so great.Here's what I had to do to install them on my 2024 GMC Sierra regular cab standard bed truck:1. No need to jack up truck or remove tires.2. Use a T15 Torx driver and a T15 Torx bit with a 1/4" wrench or socket/ratchet.3. Remove the little factory splash guards at the bottom front and rear of the fender. There are 4 Torx screw, two facing the tire, and two up inside the cavity accessible from below. There is also a hidden plastic clip on the outside face. You can see the prongs inside the fender lip, squeeze them with needlenose pliers and the splash guard pops off.4. Place the fender liner inside the fender. Make sure you get the Driver's Side and Passenger Side in the right place, they're clearly marked on top.5. Push it up inside and work it into position until the holes line up and you can insert the plastic push pins. Three along the bottom edge above the tire, one each on the front and rear ends.6.Reinstall the factory splash guards on top of the bottom edges of the fender liner. The plastic clip should snap back in the hole in the outside face of the fender to hold the splash guard in place. Move the fender liner around a bit until the four holes line up and you can reinstall the four screws. Repeat at the other end of the fender.7. Repeat on the other side of the truck.8. Done!Looks much nicer than bare painted sheet metal. Protects against dirt and rocks getting caught up inside the fenders. Easier to clean up, too.
Francois Lavallee
Reviewed in Canada on February 8, 2024
Très facile a installer. Installé sur GMC 2023
Kyle
Reviewed in Canada on October 6, 2024
The media could not be loaded.
Willy
Reviewed in Canada on October 4, 2024
Very easy installation, my gmc is sierra 2019 5,3 is perfect for this truck
Gerry P
Reviewed in Canada on April 30, 2024
Good product.. Fit well inside wheel well.. Seems strong.. takes a little wiggling to get it in and align the holes, but do able... i used a pry bar to help align back holes.. worked well and easy.. i did end up finding same product cheaper at local truck accessory store after the fact ..
Mike Wilson
Reviewed in Canada on May 8, 2023
Recieved the items quickly and the install was pretty easy had to use a pry bar against the tire to line up some of the holes which I am sure will relax to fit perfect next warm day we get. Only issue I am not happy with is that the wheel well does not stay true to the fender at the rear just above the factory mud flap section. There is a small gap instead of the well being tucked behind the metal of the fender this will surely let dirt and salt in and will be difficult to keep clean because there is somewhat of a shelf there for salt to sit and cause rust etc. I will be careful to address this when washing my truck especially in the months that salt from the roads is an issue.
br709
Reviewed in Canada on June 7, 2022
Installed on a 2022 Sierra. Seems to be great quality. Very easy to install despite what others have said. Had it all done in less than 20 minutes. Only little con is that there is a small gap between the liner and the mud flap so dirt will hang up there. Gap is small however and not nearly as bad as some pictures I've seen here
Harry
Reviewed in Canada on February 4, 2022
would not fit exactly as others stated, I have to cut and trim the front outer edge to fit. Then when finally installed, the trimmed edge doesn't tuck in to hide the edge.
Jason Harris
Reviewed in Canada on July 31, 2021
They were fairly easy to install, had to remove tires. The fit was terrible. On the driver’s side I had to add a piece of material to get it to fit. Next time I would buy from the dealer
Recommended Products
