Your cart is empty.
Your cart is empty. 35 Standard Roller Chain 10 FT With 1 Connecting Link
Pitch Size: 0.375 Inch
Roller Diameter: 0.200 Inch
Width Between Inner Plates: 0.188 Inch
Pin Diameter: 0.141 Inch
Pin Length L Max: 0.488 Inch
Pin Length Lc Max: 0.519 Inch
Inner Plate Depth: 0.354 Inch
Plate Thickness: 0.051 Inch
Average Tensile Strength: 2100 lb
Material: Carbon Steel
Length: 10 Feet
Weight Per Foot: 0.221 lbs
All of our chain products have gone through stringent process measures for Best Quality! This includes heat treatment, which ensures the optimum ware life and toughness for all component parts. Solid hardened and shot peened precision rollers are standard on most of our chains. The bushings provide a smooth roller bearing effect reducing the impact load as the chain engages the sprockets tooth. During chain assembly, all chain components are oriented to ensure pins, bushings, and side plates are correctly positioned for optimum chain strength and long life. Assembled chains are then dipped in a hot lubricant. This lubrication and the process in which it is applied greatly improve the ware life capacity of the chain and further protect it from the effects of the environment. All of our chains are factory preload. They are pretested to support and maintain the expected load the chain will see when in use. This helps align the chain parts which will minimize the initial elongation. This will drastically increase the life of the chain. All our Chain is certified from ISO 9001:2000 QM certification through ISO 14001 (which documents the sustainability and environmental compatibility of production and waste disposal processes) to the ISO/TS 16949 quality requirements for the automotive industry.
john slayton
Reviewed in the United States on July 23, 2020
i Needed it you had it, I got it.
Wallace
Reviewed in the United States on June 27, 2020
It was 10 foot for sure, but the rollers aren't solid rollers, they're pressed rollers with a seam and when i was breaking the link on the chain, the roller collapsed in on itself and went through the inner link hole on the opposite side of the chain and now that part of the link is useless where I needed it once the master link is placed back in the chain bunches up. so now the chain is useless to me unless I pay to buy new master links. Value was great for the amount of feet included, but if you're looking for a good chain, go with the one that's less in feet, but higher quality, not this one!
joe
Reviewed in the United States on March 3, 2020
Overall not bad for under 7HP with a torque converter.... Anything over that u need bigger chain i kept snapping them on my go cart that was 7HP with t.c . Went thru 3 or 4 chains in about 2 months n said f this I'm going bigger n never had a problem since but like I said if it's a smaller motor like 6HP n under u could get away with it... Have fun n ride on go cart brethren!!!! Lol
J. Morris
Reviewed in the United States on January 24, 2020
Great strong chain I would buy this over. I used it on for a bike pusher and it pushes my about 40 miles and hour. I have not had no problems with it all
Emaxx Owner
Reviewed in the United States on February 19, 2016
I bought this for a Go Kart project and have not installed it yet, but contained in the package was a 10ft long #35 chain and 1 #35 master link. The chain was clean, well lubricated and sealed in plastic and all links pivoted freely. The price is unbeatable and the quality is great.
Recommended Products
$21.56
$ 10 .07 $10.07