Your cart is empty.
Your cart is empty.Amazon.ca Product Description
This 1/2-Inch wide, self-adhesive measuring tape fits snugly into the indentation on the topside of our Top Trak and Heavy Duty Trak. Metallic tape is highly scuff resistant and can be trimmed to length with a scissors. Be sure to choose the correct tape orientation...le Feet-to-right reading to the right of the saw blade, right-to-le Feet reading to the le Feet of the saw blade.
From the Manufacturer
This 1/2" wide, self-adhesive measuring tape fits snugly into the indentation on the topside of our Top Trak and Heavy Duty Trak. Metallic tape is highly scuff resistant and can be trimmed to length with a scissors. Be sure to choose the correct tape orientation...left-to-right reading to the right of the saw blade, right-to-left reading to the left of the saw blade.
RDWile
Reviewed in Canada on July 11, 2024
A key part of my table saw sled build.
Rodney Smith
Reviewed in the United States on December 12, 2024
The description on both of these products by Amazon was very unclear. It is also misleading. In Amazon's description for both products, it says, "This 12 foot, 1/2 inch wide tape measurer has right-to-left and left-to-right reading options." THEY DON'T! Just to let you know, the KMS7723 reads from (Right to Left) only. The KMS7724 reads (Left to Right) only. I took a gamble and ordered them both because they had different item numbers. I received what I was hoping for. It clearly shows on the product packaging that I received as to which is what. I hope this helps someone out that needs to purchase tapes that read from one direction or the other or need both as I did so that you receive what you are expecting.
Jared Fink
Reviewed in the United States on November 12, 2024
Used this tape for my miter station build. Worked great.
Yves Sagala
Reviewed in Canada on January 21, 2024
Très facile à utiliser
Mathieu
Reviewed in Canada on July 29, 2023
Measurements where good
Hillbill
Reviewed in Canada on March 24, 2023
Used for miter saw station - works fine - over a month to deliver was only negative
Donna Prime
Reviewed in Canada on December 27, 2023
Good product, strong adhesive easy to to read tape a little expensive but I think it is worth it.
Brian
Reviewed in Canada on September 15, 2021
works as expected
Jeremy
Reviewed in Canada on July 24, 2021
I installed it in the Kreg mini track and it worked perfectly. I dry fitted it first and cut it to length. I was concerned by some other reviews as to how I was going to get it in that tight track without it sticking until I was ready. When dry fitting I noticed it naturally wanted to go in on an angle from front to back, so I leveraged that. When I was ready to stick it down I deliberately slid it in on that angle, removing the backing as I went. When I had it where I wanted it, I simply pushed it flat.
A. Voelcker
Reviewed in the United States on March 15, 2021
I bought this from Amazon to go with my the tracks I bought directly from Kreg. The tape is easy to see even from arms length away from the work bench. I rated the adhesion a 4 since I was expecting the tape to be a little harder to pull up than it was, I had to reposition mine after cutting and placing it on the track. Also, I don't know if its typical or if my case was a fluke, but peeling the backing off the tape measure was a pain in the neck. I was laying down 6' of tape and peeling and placing as I went, taking my time fortunately. But every inch or two, the backing would rip. I ended up just taking it slow and carefully using a utility knife to get under the ripped pieces of backing to peel them away and then kept going.Aside from that, I'm happy with the results and the added functionality of precise and repeatable cuts from my miter saw.
DIY guy
Reviewed in Canada on July 25, 2020
I used this for may fence less miter saw stand and it worked great, I like the fact that it is metal as it lays flat and should last along time, the adhesive back is very strong an make it a breeze to install. I would highly recommend this product. Worth noting is there are two options for these, "left to right reading" and "right to left reading" ensure you are ordering the correct one for your application
Alabama Chef and Woodworker
Reviewed in the United States on August 27, 2019
I bought several of these tape measures for fences I was making for saws in my workshop. They are very substantial, nice sharp markings, adhere extremely well (on a clean surface), and easy to install. What more can you ask? I do which Craig made a shorter version. My longest fence is 4' so I wasted an awful lot of material. I made the mistake on the first tape of just measuring from the blade to the point at which I indexed the tape measure. NOT! Remember, when installing them, to measure to the leading edge of your stop block, but mark along the cursor line to index the tape location. The tape needs to line up with the cursor. Fortunately, because the tape is made of such sturdy material, I was able to remove it and reinstall it at the proper location.
Othón Navarrete V
Reviewed in Mexico on January 18, 2016
buena cinta, de metal y revestimento de polimero resistente, perfecta para mi tallertambien compre la otra, una es R a L y la otra es L a R
Recommended Products
