Your cart is empty.
Your cart is empty.Product Description
Brake and Clutch Fluid Pneumatic Vacuum Bleeder Tool Kit Brake Oil Change Set
Feature:
Car brake fluid changer tool kit includes new oil refill device and waste oil extractor, 2 in 1 set
One person operation design, easy to handle
Widely suit for car truck motorcycle pickup and most vehicles
Easy to use
The simplicity of this tool allows brake bleeding to get done by one person easily
Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system
Flush and refill entire brake system 34 oz
Waster Brake Fluid Tank 24 oz
New Fluid tank that inserts into your master cylinder with provided adapters
Wast Oil Bottle
Feature with a universal rubber fitting that holds securily on brake bleed screw and a transparent drain hose that allows for visual inspection of old fluid during bleeding. Convenient hanging hook and locking trigger make it unnecessary for manual operation.
Oil Filler Bottle
This bottle can be held on the brake fluid reservoir and it has a long screw with a valve, works with a right adapter to stuck on the brake fluid reservoir, no manual support required
Air Quick Plug
Two male air quick plugs: American & European style, meet your different needs. Solid construction for corrosion resistance and longer service life
Mater Cylinder Adapter
Made of strong plastic material. Screw on the long screw of new oil bottle, help the bottle get stuck on the master cylinder. Suitable for most manufacturers' master cylinders 1.25" - 1.60" (32-41mm) 1.10" - 1.45" (28-37mm) 0.95" - 1.25" (24-32mm) 0.80" - 1.20" (21-30mm)
Customer
Reviewed in Canada on March 6, 2025
Found to be poor quality with the bleed hose was folded rather than rolled up and needed to be replaced before use
Yan masson
Reviewed in Canada on June 21, 2023
vraiment tres surprenant , on garde en tete que ces un kit a 30$ cheap mais fonctionne tres bien jai seigner 4 frein et un master cylindre de clutch en quelque minute seul avec sa
Reg 21
Reviewed in Canada on May 27, 2023
A l air correct pas essayé encore
Eric Bordeleau
Reviewed in Canada on March 10, 2023
There was big burr on the fillet part of the bottle , so i was not able to screw the cap bottle (filling bottle).The molded plastic was not deburr at all. So i did the job but it is not a cheap kit , cost me 40$ including shipping and out 15% taxes!!!
Andrew
Reviewed in Canada on December 5, 2023
Worked great the first 3 times I used it to bleed brakes on my vehicles. By the fourth use it started to intermittently backflow, pushing old fluid and air into my brakes. By the last caliper it would only backflow, leaving me with a soft pedal. Waste of time and money. Do not buy this.
eric
Reviewed in Canada on June 8, 2022
this thing actually works great. whoever complains, doesnt know what they are talking about, and are also not mechanically inclined.
VSAB
Reviewed in Canada on October 22, 2022
Use it to suck out over-filled engine oil thru the dip stick hole. Works very well. the container's plastic wall is thick and solid. No complain at all. by the way, the thread is 1/4NPT, you need a fitting to connect your pump.
Gadow Girl
Reviewed in Canada on December 27, 2021
Great, have used a couple of times.
Recommended Products