Your cart is empty.
Your cart is empty.Underbody Cavity Shield Cover for Ford Maverick 2022-2025 Accessories, Left Driver Side Rear Wheel Underbody Splash Shield Cover Prevent Mud and Stone
Airborne Doc
Reviewed in the United States on February 26, 2025
This comes packaged extremely well, and feels quite durable. The quality definitely seems to be there. The problem is, I have a 2025 Hybrid, and it does not fit. Not one single picture on this page or the instructions looks like the bottom of my truck. Save yourself the time and hassle, and do not order this if you have a hybrid.
Metals Geek
Reviewed in the United States on February 12, 2025
Let's get real. This product is a mud and splash shield. It should not be any fancier than necessary. My only complaint is that too much effort and expense was used to make it as good as humanly possible. The packaging was outstanding; better than on a high-definition digital monitor I recently purchased. Fitment was as good as any aftermarket part can reasonably be expected to be. 10 mm & 19 mm wrenches are included. At least some of the fasteners are stainless. Instructions are better than average. So... it fit my 2023 XLT hybrid perfectly. However... you WILL need an 18 mm socket (not included) to R&R a couple of stock bolts. I used my own 10 & 19 mm sockets instead of the provided tools. Probably the only thing I would change is Mabett's use of very large stainless bolts & captive nuts in a location (large square hole) where a snap-in plastic insert and a sheet metal type screw would have worked better and cheaper. Not much of a gripe, eh? It's a good product and I recommend it.
James D. Tapscott
Reviewed in the United States on April 15, 2025
This item is a good fit for my 2024 Ford Maverick non hybrid. The instructions weren't very clear though. In fact, the diagrams didn't really look like the underside of my truck.The instructions also mentioned disconeting a wiring harness and a exhaust bracket, which I didn't have to do.The included tools were totally inadequate. The factory installed bolts are very tight. Im attaching a picture of the included socket wrench that broke trying to get them loose. I would recommend having a ¾ inch drive metric socket set with a long wrench handle or a breaker bar.My final installation appears to be very secure, but I had some left over small brackets. I couldn't figure out.Despite these difficulties, I'm happy with this purchase. I expect it to do what it is intended to do.I don't know why Ford didn't build this into the truck to begin with.I have some accessory electronics installed in those bed access panels near the tail lights. I expect that this installation will keep those clean and dry.
Erin Porter
Reviewed in the United States on April 12, 2025
I read a ton of reviews before purchasing this underbody shield and most of what I'll say is redundant to other reviews. However, one reviewer indicated this does not fit their 2025 Hybrid and it in fact does. It is a bit disorienting and takes patience (and watching the video) to locate the bolts/holes/etc but this is machined to fit!Redundant comments:-The 2 large bolts in the frame that are removed are a PITA. It's hard. Use a breaker bar, metal pipe over the socket wrench handle, or impact drill.- I didn't remove the exhaust hanger- The screws for the installed hangers are a little short - squish the locking washer and push up on the shield to limit the gap. Once it threads it's fine, just take some finesse.- One of the hangers threads was coated with the black paint - I had to pre thread the bolt to knock it off before installingAll that said, installation is straightforward after orienting and just takes the right tools and some patience. Definitely have peace of mind now that wet road gunk, mud, salt and snow won't be able to get in there and rust it out.
R. J. Gregory
Reviewed in the United States on November 26, 2024
Nicely packaged and seems like good quality. I would not bother with the included tools if you have a good socket set yourself. Install went fine, though it took me quite a while to get the holes lined up for the second plate. I had to loosen and move it multiple times to get all the included bolts in. Some swearing occurred, but I eventually got it. If I had to do another one it would go much faster. They should post an install video. 24 Lariat.
Recommended Products
