Your cart is empty.
Your cart is empty.The furnace motor is attached to the blower wheel and the combustion air wheel. Once the control board sends power to the motor, it will start operating which will move the shaft attached to both wheels. The movement of both wheels will cause air flow.
Pawl Good
Reviewed in the United States on February 26, 2025
Bought this as a replacement motor for my 1987 Ford Econoline camper with the original Suburban NT-12S furnace.Perfect fit. Exact replacement. Great product super quiet.
Frisco
Reviewed in the United States on January 16, 2025
The media could not be loaded.
Rockies
Reviewed in the United States on July 23, 2024
The new electric motor worked in this furnace, the 2 mounting bolt studs were longer, and need to be cut off, to match old motor. The black electric wire on ne motor was cut and rubber insulator trimmed, along with the two existing ground wires, and a electric wire nut and electrical tape was used to secure this connection. Both fans mounted to new motor.
Dylan Chapman
Reviewed in Canada on March 25, 2024
Show’s up late and did not even work
James C.
Reviewed in Canada on November 18, 2024
Delivery was fast parts all fit good
James
Reviewed in Canada on October 28, 2024
Could not find a replacement motor for my suburban RV Furnace based on there part guide. Finally just had to roll with measurements and this one fit the bill. Worked out perfect, running well. You have to watch the clearance when mounting the wheel that draws air in but I got it just right. Saw another review where the guy had to cut it, I did not. Either way for all the RV guys out there this one works!Suburban® 520950 – Furnace Motor for Suburban™ NT-16, NT-20S, NT-20SE, NT-16SE (Above Serial Number 000303844) FurnacesINT-20SEQ, NT-20SEPart#521068Part#230634
Lucky
Reviewed in the United States on June 29, 2023
It fit perfectly in the Atwood 7916-II that is in my 94 Lance camper. I just installed it and tried it out. I don't know how long it will last, but it appears to be the same build quality as the original unit that was almost 30 years old. If it fails within the next few years, I will update my post.
BidetToday
Reviewed in the United States on October 17, 2023
This was what I needed to stop the squealing on my FA7916D furnace.I did replace the combustion fan impeller as well because the impeller was was seized to the old motor shaft, I had to cut the shaft to remove the impeller to uninstall/reinstall the motor.I am happy I fixed my furnace.
Bob Enns
Reviewed in Canada on July 13, 2022
Very quiet running.
Brandon B
Reviewed in Canada on April 19, 2022
Excellent construction and quiet operation.
Recommended Products
