Your cart is empty.
Your cart is empty.Product Description
The gas fire pit valve control assembly kit is suitable for most low pressure system without pilot burner for outdoor fire pit or fireplaces.
Max Rating BTU is 50000.
The valve is a flame failure valve and have to work with thermocouple together.
Operation Instructions
1). Fix the valve on a plate or board of your grill or fire pit by the head screw and flange.
2). Connect your inlet and outlet hose on inlet and outlet side. (faston it tightly enough in case of gas leakage)
3). Faston the thermocouple nut M*8 on the valve end tightly
4). Connect thermocouple and end thread well
5). Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough.
6). Release your hand and it work properly If when you release hand, gas valve shut off again, Please check
a. If your thermocouple is always be heated on flame b. If the thermocouple end is well connect with valve c. If the inlet and outlet side well connect with hose you have
Gas Valve with Inlet & Outlet 3/8" Male Flare Thread
Bakelite Knob High Temperature Resistance 120°C
Common Parts for a Fire Pit
Gas Valve Control Assembly
Kroop
Reviewed in Canada on June 22, 2024
Perfect replacement for my firepit
stefan Mollenhauer
Reviewed in Germany on November 4, 2024
Super 👍
Lisa Flegg
Reviewed in Canada on April 14, 2024
Pretty straightforward to put the new part in. That was nice. Worked on the first try. Only issue is although the dial has low-high dial setting, there is no difference at all between the settings - the flame stays the same no matter where the dial is set - seems like its perma-set to medium flame compared to the part that was replaced which had a bigger flame and could be turned down to low. Seems wrong but at least I have a flame.
Lord Mats Andersson Frid
Reviewed in Sweden on September 5, 2023
Fördelar och håller lågorna många ok
Sean Good
Reviewed in Canada on July 20, 2023
When I ordered the product it said one left in stock. I can see why now. Product arrived completely shattered as seen in picture.
Ryan Kamba
Reviewed in the United States on April 30, 2023
As someone who enjoys using gas fireplaces and fire pits, safety is always a top priority for me. I recently purchased the MENSI Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit, and I am very impressed with its reliability and safety features.The kit comes with all the necessary components to replace an existing control valve or install a new one, including a thermocouple, thermocouple mounting bracket, and control valve. The installation process was straightforward and didn't take long, thanks to the clear instructions provided.One of the most notable features of this kit is its flame failure safety control valve. This valve automatically shuts off the gas supply if the pilot light goes out, preventing gas leaks and potential fire hazards. This feature gives me peace of mind when using my gas fireplace or fire pit, especially when I am not around to monitor it closely.In addition to its safety features, the kit also works well and provides excellent control over the flame. The valve is easy to use and allows me to adjust the flame to my desired level easily. The kit is also compatible with low-pressure LPG propane gas, making it versatile for use with a range of gas appliances.Overall, I highly recommend the MENSI Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit for anyone looking for a reliable and safe control valve for their gas fireplace or fire pit. The flame failure safety control valve provides excellent protection against gas leaks and fire hazards, and the kit is easy to install and use. It's a worthwhile investment for anyone who prioritizes safety when using gas appliances.
Bryan
Reviewed in Canada on September 25, 2022
Used this gas valve to replace a seized valve on a Canadian Tire propane fire pit. It was an exact replacement and the new thermocouple that came with it was worth it because the old one broke during disassembly.
ajerzy
Reviewed in Germany on June 20, 2022
ok
Customer
Reviewed in Canada on September 28, 2020
Item was ordered for patio heater and works and fits very well. great price.
Trevor hutt
Reviewed in Canada on December 21, 2020
Product was delivered fast. And installation is simple.
LCD
Reviewed in Canada on November 6, 2020
Good product. Too bad the company that sold us the fire table didn't use this product in the first place.
Stephen Percival
Reviewed in Canada on December 11, 2019
Easy to install, worked great first time.
Mech_Engineer_Ed
Reviewed in the United States on October 29, 2019
I purchased this item to replace a faulty gas valve assembly on a Bond Signature Series, Canyon Ridge Gas Fire Table; Model 67385, or Lowes item number 472966. The propane valve was a perfect fit with no modifications necessary for mounting. This was the same situation for the thermocouple mounting within the firebowl /flame pit area. The thermocouple has length to spare when routing around the main gas burner line. The gas valve has a back-up plate behind the panel mounting nut that made it more secure than the original gas valve. The original manufacturer's 3/8" gas lines mated to the gas valve without any issues. I used the same adjustment knob that came with the Canyon Ridge Gas Fire Table, since it fit the gas valve's "D" profile main shaft to make it look original. The low, pilot, and high setting positions on the gas valve are the same as the original, so the panel markings truly indicate the gas valve functions. I was so pleased with the fit, form and function; I just order another for a spare.
Recommended Products